阳极
材料科学
背景(考古学)
多孔性
电极
欧姆接触
电解
化学工程
分层(地质)
质子交换膜燃料电池
催化作用
复合材料
阴极
析氧
电镀
电化学
电解质
图层(电子)
降级(电信)
膜
聚合物电解质膜电解
动力学
作者
Abhay Gupta,Dhinesh Kumar Murugaiah,Anurag Anurag,Samaneh Shahgaldi
标识
DOI:10.1016/j.jpowsour.2026.241936
摘要
Decreasing Ir catalyst loading and increasing its utilization are key focuses of the proton exchange membrane water electrolyzer (PEMWE) industry. In the context of keeping anode Ir loading low (<0.25 mg/cm 2 ), this study develops a porous transport electrode (PTE) configuration by fabricating an electroplated Pt-based nanodendritic surface on a sintered porous transport layer (PTL) for Ir catalyst sputter deposition. Such an ink-free PTE configuration is then compared with the IrO x ink-based anode catalyst-coated membrane (CCM) and PTE configurations with similar Ir loading. Nano-dendritic Pt surface on PTL led to improved oxygen evolution reaction (OER) kinetics and lower ohmic losses during PEMWE operation. After 300 h of accelerated stress testing (AST), the surface-engineered PTE configuration demonstrated better durability, with a 7.9% increase in output voltage at 2.0 A/cm 2 and a 13.9% increase in high-frequency resistance (HFR). In contrast, higher voltage degradation (12.2%) and HFR increase (22.1%) were observed for the CCM configuration. Post-AST SEM analysis revealed loss of structural integrity in the CCM configuration, with cracks and delamination in the catalyst layer. These results highlighted the capability of an ink-free, nano-dendritic, surface-engineered PTE configuration for high electrical conductivity, HFR stability and improved OER kinetics with low Ir loading in PEMWE operation.
科研通智能强力驱动
Strongly Powered by AbleSci AI