ABSTRACT Terephthalic acid (TPA) obtained from waste polyethylene terephthalate (PET) bottles by alkaline hydrolysis method, was used to synthesize Bi‐based metal‐organic framework (Bi‐TPA). The pyrolysis of Bi‐TPA yielded Bi 2 O 3 along with carbon (Bi 2 O 3 ‐C). Physicochemical characterizations revealed the formation of Bi‐TPA nanowires and Bi 2 O 3 ‐C. Bi‐TPA was used as a catalyst in the CO 2 electrochemical reduction reaction (ERR) to produce formate on the cathodic side. Ethylene glycol aqueous solution (PET hydrolysate), obtained from PET alkaline hydrolysis, was further oxidized to obtain formate using Bi 2 O 3 ‐C as a catalyst on the anodic side. Hence, this study identifies the potential of alkaline hydrolysis method of PET recycling for formate production. Faradaic efficiency of 75.2% for the formation of formate with the current density of 48 mA/cm 2 was found during CO 2 ERR at −1.8 V (vs. Ag/AgCl). Faradaic efficiency of 38.1% for the formation of formate with the current density of 18 mA/cm 2 was achieved during PET hydrolysate oxidation at 1.8 V (vs. Ag/AgCl).