Heterogeneous photocatalysis has been shown to be an effective means of removing organic and inorganic pollutants from water streams. Most conventional photocatalytic reactor systems have deficiencies such as photocatalyst recovery, illumination, and distribution and low reactive surface area. In order to overcome these deficiencies we have developed and characterized a reactor system that employs an optical fiber cable as a means of light transmission to solid-supported TiO{sub 2}. Light energy is transmitted to the TiO{sub 2}, coated on the fiber cores, via radial refraction of light out of the fiber. Factors found to influence significantly the efficiency of the optical fiber reactor are the distance of light propagation down the fiber, the degree of absorption by the coating of the refracted light, and the ability of the chemical substrate to diffuse into the coating. A coating with minimal fiber-core: TiO{sub 2} interfacial surface area and incident angles approaching 90{degrees} enhance propagation. An optimal coating should also ensure operation in a reaction-limited regime and have a thickness equal to the inverse of the absorption coefficient. Maximum quantum efficiencies of {phi}=1.1% for the oxidation of 4-chlorophenol were achieved. This can be compared to a {phi}=0.6% for a slurry reactor operated under similarmore » conditions.« less