Electrical and photovoltaic properties of residue-free MoS2 thin films by liquid exfoliation method

Molybdenum disulfide (MoS₂) film fabricated by a liquid exfoliation method has significant potential for various applications, because of its advantages of mass production and low-temperature processes. In this study, residue-free MoS₂ thin films were formed during the liquid exfoliation process and their electrical properties were characterized with an interdigitated electrode. Then, the MoS₂ film thickness could be controlled by centrifuge condition in the range of 20 ∼ 40 nm, and its carrier concentration and mobility were measured at about 7.36 × 10¹⁶ cm^-3 and 4.67 cm² V^-1 s^-1, respectively. Detailed analysis on the films was done by atomic force microscopy, Raman spectroscopy, and high-resolution transmission electron microscopy measurements for verifying the film quality. For application of the photovoltaic device, a Au/MoS₂/silicon/In junction structure was fabricated, which then showed power conversion efficiency of 1.01% under illumination of 100 mW cm^-2.