电容感应
谐波
距离测量
谐波分析
观测误差
计算机科学
电子工程
声学
工程类
电气工程
物理
数学
人工智能
统计
作者
Hongji Pu,Xiaokang Liu,Zhicheng Yu,Kai Peng,Hewen Wang
标识
DOI:10.1109/tim.2025.3547504
摘要
This study builds upon a pre-proposed position sensor with nanometer-scale resolution and submicrometer level accuracy to directly obtain absolute positioning by optimizing its coarse measurement component. First, the coupling error caused by the spatially nonuniform electric field distribution is analyzed by building a 2-D electric field model. Theoretical analysis shows that the measurement error caused by the coupling of the nonuniform electric field is primarily a 4th-order harmonic error. Accordingly, we develop a method for suppressing the 4th order harmonic error using spatial phase shifting (SPS) based on a sinusoidal electrode height modulation. Here, the coarse measurement component is divided effectively into two sensors with a spatial phase shift of$\pi $/4. This obtains two measurement values with 4th order harmonic errors of the same amplitude but opposite in sign, and two values are then averaged to form a new value with the 4th order harmonic error removed. Experimental results using a prototype sensor fabricated using printed circuit board (PCB) technology demonstrate that the 4th order harmonic error is greatly reduced, and the measurement error of the coarse measurement component is reduced to about 1/7 of the original error prior to optimization. Therefore, the coarse measurement component can achieve direct absolute positioning. The absolute position maximum permissible error (MPE) of the sensor achieved was$\pm 0.254~\mu $m over a range of 200 mm after error compensation.
科研通智能强力驱动
Strongly Powered by AbleSci AI