硼
锂(药物)
化学
分析化学(期刊)
萃取(化学)
硼酸锂
标准物质
电位滴定法
原子吸收光谱法
材料科学
检出限
色谱法
硼酸盐玻璃
离子
医学
物理
有机化学
内分泌学
量子力学
作者
A. A. Kalinina,I. A. Konopkina,O. V. Vakhnina,I V. Koroleva,К. Б. Жогова,S. A. Annikova
出处
期刊:Заводская лаборатория. Диагностика материалов
[TEST-ZL Publishing]
日期:2023-01-21
卷期号:89 (1): 20-27
被引量:1
标识
DOI:10.26896/1028-6861-2023-89-1-20-27
摘要
A lithium-boron alloy (LBA) with a high lithium content (up to 70%) is used as an anode material for molten salt batteries in chemical sources of current. We present a complex of developed techniques for determining mass fractions of free lithium, total lithium, and total boron in lithium-boron alloys containing lithium mass fractions no more than 70%, boron mass fractions — no less than 26%. Optimal conditions for preparation of LBA samples and subsequent free lithium extraction from them are determined. The developed techniques are intended for i) extraction-titrimetric determination of free lithium in a content range of 20 - 50% (the relative total error no more than 1.1%); ii) determination of the total lithium content using flame atomic emission spectrometry in a content range of 59.0 - 96.0% (the relative overall error no more than 2.7%; iii) determination of the total boron content by two methods, i.e., potentiometric titration within a content range of 5 - 40% (the relative total error no more than 1.3%) and flame atomic absorption spectrometry within a content range of 4.9-50.7% (the relative total error no more than 4.9%). The results of analysis of full-scale LBA samples for the content of free lithium, total lithium and total boron are presented. It is shown that the application of two techniques for the determination of total boron content in lithium-boron alloys makes it possible to get the convergent results within the limits of measurement errors. The developed techniques are certified by the metrological service of the enterprise and can be used for the incoming and process control of the LBA production.
科研通智能强力驱动
Strongly Powered by AbleSci AI