材料科学
传热
冷却液
努塞尔数
计算机冷却
压力降
机械
散热片
强化传热
传热系数
板式换热器
热力学
水冷
鳍
下降(电信)
复合材料
强化传热
冷却能力
体积流量
热撒布器
临界热流密度
玻璃
液体电介质
板翅式换热器
NTU法
热流密度
作者
Feifei Liu,Daoyue Zheng,Qilong Yang,Qin Wu,Xianfu Cheng,Jun Li
摘要
Addressing issues such as low heat transfer intensity, high system power consumption, and poor temperature uniformity in liquid cooling plates for lithium‐ion batteries (LIBs) in electric vehicles (EVs), a pin‐fin liquid cooling plate was designed to enhance comprehensive heat transfer performance. After modelling the dynamic internal heat source of the LIB, the effects of coolant flow rate ( v ), pin‐fin length‐short side angle ( ω ), pin‐fin length‐short side ratio ( a/b ), and pin‐fin rotation angle ( β ) on the comprehensive heat transfer performance of the liquid cooling plate were simulated and analyzed. The Kriging approximation model and adaptive simulated annealing (ASA) algorithm were used to optimize the heat dissipation structure of the liquid cooling plate. The optimized oblique fin liquid cooling plate reduces the battery module's maximum temperature ( T max ) and temperature difference (Δ T ) by 1.12% and 6.8%, respectively, compared to the traditional parallel channel plate. It also decreases pressure drop (Δ P ) by 30.4% and increases the Nusselt number ( Nu avg ) by 7.85%. Compared to the initial rectangular fin design, T max and Δ T drop by 0.16% and 2.8%, while Δ P and Nu avg decrease by 26.5% and 6.9%. The E PEC values are all greater than 1, demonstrating enhanced heat transfer capability.
科研通智能强力驱动
Strongly Powered by AbleSci AI