New approach to 3D-print methacrylic acid/polyethylene glycol diacrylate-based membranes based on polymerization induced phase separation

膜 材料科学 化学工程 甲基丙烯酸 多孔性 渗透 聚合物 聚合 超临界流体 高分子化学 聚乙二醇 光接枝 溶剂 相(物质) 制作 吸附 乙二醇 PEG比率 色谱法 原位聚合 聚乙烯 单体 合成膜 超滤(肾) 超亲水性 膜乳化
作者
Haleh Nourizadeh Kazerouni,Gabriel Toshiaki Tayama,Julie Fréchette,Younès Messaddeq
出处
期刊:Journal of Membrane Science [Elsevier BV]
卷期号:741: 125047-125047
标识
DOI:10.1016/j.memsci.2025.125047
摘要

We present a novel freeform fabrication strategy for polymer membranes via 3D printing, in which porosity is generated through a polymerization-induced phase separation mechanism. The approach employs a vat-photopolymerization compatible formulation to produce a macroporous network with coexisting mesoporosity. Hydrophilic flat-sheet membranes (400 μm thick) were fabricated and subjected to post-treatments involving CO 2 supercritical drying and solvent exchange. The resulting membranes exhibited permeance of up to 36 and 29 LMH.bar −1 , respectively, under a transmembrane pressure of 2 bar. An in-depth evaluation was conducted on membranes produced from photocurable formulations containing methacrylic acid (MA, 30 vol%) and polyethylene glycol diacrylate (PEGDA, 20 vol%), with varying ratios of 1-butanol and 2-phenoxyethanol as porogens. SEM analysis revealed a porous morphology throughout the membrane cross-section. The top-performing sample exhibited the highest specific surface area of 12.8 m 2 /g and the smallest mean pore diameters of 45 nm and 42 nm, as determined by adsorption branches of Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) analyses, respectively. Pore size distribution was compared with liquid-liquid displacement method, which revealed mean pore size of 8.8 nm, with a small quantity of pores of approximately 121 nm, which were in better agreement with pure water flux values. The influence of post-polymerization porogen removal methods—solvent exchange and supercritical drying—was also assessed. Post-treated membranes demonstrated lower compaction factors and more stable flux over time and under increasing pressure. This technique offers a promising route for the customized design of membrane geometries and architectures tailored to specific separation challenges. We further demonstrate such concept by printing textured membranes with wavy and rugged surface profiles. • Flat-sheet membranes were 3D-printed using different resin formulations for comparative evaluation. • Macroporous and mesoporous architectures were successfully achieved through polymerization-induced phase separation. • The ratio of 1-butanol to 2-phenoxyethanol significantly influenced specific surface area and pore size distribution. • Post-fabrication treatments reduced membrane compaction and enhanced structural stability. • The membranes exhibited high pure water flux, demonstrating their potential for efficient filtration applications.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
科目三的应助被chen9u0采纳,获得10
1秒前
zsq关闭了zsq的文献求助
2秒前
白喝水了完成签到,获得积分10
2秒前
焱焱完成签到 ,获得积分10
3秒前
牧百川发布了新的文献求助10
3秒前
可爱的函函的应助被zhangxinyi采纳,获得10
3秒前
3秒前
ljy0825完成签到 ,获得积分10
3秒前
FashionBoy的应助被houniao采纳,获得10
4秒前
李爱国的应助被KingWave采纳,获得10
4秒前
ma发布了新的文献求助10
4秒前
Starry发布了新的文献求助10
5秒前
Anna发布了新的文献求助10
5秒前
不醒的猫完成签到 ,获得积分10
5秒前
6秒前
6秒前
Liqingqing完成签到,获得积分10
6秒前
啊哈完成签到,获得积分10
6秒前
核桃的应助被zs采纳,获得30
7秒前
所所的应助被ggk采纳,获得10
7秒前
CWJ发布了新的文献求助20
8秒前
9秒前
水煮电吹风的应助被沐沐采纳,获得10
10秒前
深情安青的应助被沐沐采纳,获得10
10秒前
11秒前
科研小能手的应助被虚心的醉香采纳,获得150
11秒前
隐形曼青的应助被武陵济世采纳,获得10
12秒前
12秒前
13秒前
mengxiang发布了新的文献求助10
13秒前
鹏鹏完成签到,获得积分10
14秒前
14秒前
qq完成签到,获得积分10
15秒前
牧百川发布了新的文献求助10
15秒前
huihui完成签到,获得积分10
15秒前
16秒前
鹏鹏发布了新的文献求助10
16秒前
沐沐完成签到,获得积分10
16秒前
17秒前
KingWave发布了新的文献求助10
17秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8183739
求助须知:如何正确求助?哪些是违规求助? 9572996
关于积分的说明 21828615
捐赠科研通 7780904
什么是DOI,文献DOI怎么找? 3434101
关于科研通互助平台的介绍 2558294
邀请新用户注册赠送积分活动 2480564