功率分配器和定向耦合器
表面等离子体激元
电阻抗
波导管
等离子体子
光学
共面波导
电阻器
微波食品加热
光电子学
电力传输
阻抗匹配
物理
表面等离子体子
材料科学
电气工程
电压
工程类
量子力学
作者
Shiyan Zhou,Jing‐Yu Lin,Sai‐Wai Wong,Feiqi Deng,Lei Zhu,Yang Yang,Yejun He,Zhi‐Hong Tu
标识
DOI:10.1038/s41598-018-24404-0
摘要
Periodic corrugated metal structure is designed to support and propagate spoof surface plasmon polaritons (SSPPs) wave in the microwave frequencies. In this paper, firstly a plasmonic waveguide consisting of oval-ring shaped cells is proposed with the performance of high transmission efficiency in a wide frequency range. The coplanar waveguides (CPWs) with 50 Ω impedance are adopted to feed the energies or extract signals at both ends of the plasmonic waveguide. Then a well-isolated power divider is constructed based on the SSPPs waveguides aiming to equally split the energy of the SSPPs wave into two equal parts. The stepped-impedances are co-designed with the three input/output ports of the power divider to achieve the impedance-matching between the SSPPs waveguides and the coplanar waveguides. Besides, a single resistor is placed in the middle of two symmetrical half oval-rings to realize the isolation between the two output ports over the spectrum of 4.5-7.5 GHz. Finally, both plasmonic waveguide and the power divider are fabricated and tested to verify the predicted characteristics.
科研通智能强力驱动
Strongly Powered by AbleSci AI