石墨烯
光催化
双氯芬酸钠
水溶液
铋
氧化物
复合数
可见光谱
材料科学
双氯芬酸
化学工程
化学
纳米技术
催化作用
有机化学
复合材料
色谱法
生物化学
工程类
光电子学
作者
Jamshaid Rashid,Shumaila Karim,Rajeev Kumar,Mohamed Abou El-Fetouh Barakat,Bilal Akram,Naveed Hussain,Hu Bin Bin,Ming Xu
标识
DOI:10.1038/s41598-020-71139-y
摘要
Abstract In this study, bismuth oxychloride/graphene oxide (BiOCl-GO) composite was fabricated by facile one pot hydrothermal method. The pure BiOCl and BiOCl-GO composite was characterized by X-ray diffraction, Transmission electron microscopy X-ray photoelectron spectroscopy and UV–Vis diffuse reflectance spectroscopy. The synthesized composite was then assessed for photocatalytic degradation of diclofenac sodium (DCF) in visible as well as direct solar light and UV irradiation. Results indicated that the photocatalytic removal efficiency of DCF was significantly affected by dose of catalysts, pH value and source of light. The results reveled that degradation efficiency of BiOCl-GO for DCF reduced from 100 to 34.4% with the increases in DCF initial concentration from 5 mg L−1 to 25 mg L−1. The solar light degradation of DCF using BiOCl-GO was achieved with apparent rate constant 0.0037 min−1. The effect of scavengers study revealed that superoxide ions and holes were mainly responsible for DCF degradation. The regeneration study indicates that BiOCl-GO composite can be successfully recycled up to the five cycles. The study revealed the effectiveness of one pot hydrothermal method for the fabrication of BiOCl-GO composite.
科研通智能强力驱动
Strongly Powered by AbleSci AI