材料科学
钙钛矿(结构)
钝化
甲脒
制作
介观物理学
能量转换效率
光伏系统
光电子学
表面能
介孔材料
纳米技术
化学工程
带隙
接口(物质)
佩多:嘘
钙钛矿太阳能电池
混合太阳能电池
四氢呋喃
工作(物理)
甲苯
降级(电信)
太阳能
作者
Yongming Ma,Jiale Liu,Xiayan Chen,Jianhang Qi,Siqi Jiang,Chuanzhou Han,Shuang Liu,Bin She,Yang Zhou,Zhong’an Li,Yinhua Zhou,Anyi Mei,Hongwei Han
摘要
ABSTRACT Hole‐conductor‐free, fully printable mesoscopic perovskite solar cells (p‐MPSCs) hold compelling promise for photovoltaic industrialization. However, their power conversion efficiency (PCE) remains constrained by limited hole collection at the perovskite‐carbon interface. Here, we introduce a synergistic bimolecular post‐treatment using toluene diisocyanate (TDI) and 4‐methyl sulfonyl phenyl methylammonium chloride (MSBH) to reconstruct this critical interface. We demonstrate that TDI reacts with surface formamidinium to polish and activate the perovskite terminations, while MSBH subsequently grafts onto this activated surface. This combined action simultaneously reconstructs the interface with optimized surface energy band bending and minimized interfacial defects, thereby facilitating hole extraction and suppressing non‐radiative recombination. Consequently, this strategy elevates the PCE of small‐area p‐MPSCs (0.1 cm 2 ) to 23.6%. Furthermore, it enables the fabrication of a p‐MPSC minimodule with an active area of 52.7 cm 2 , achieving a PCE of 22.1%, among the highest values ever reported for carbon‐based, fully printable architectures. Devices retained 98% of their initial PCE after 750 h of operational stability testing at 55°C ± 5°C. This work provides an effective interface reconstruction strategy that concurrently addresses defect passivation and energy alignment, paving the way for high‐performance, stable, and scalable cost‐effective perovskite photovoltaics.
科研通智能强力驱动
Strongly Powered by AbleSci AI