材料科学
复合材料
复合数
方位(导航)
陶瓷
变形(气象学)
扫描电子显微镜
振动
有限元法
热稳定性
支承面
热的
耐磨性
发热
聚合物
表面粗糙度
摩擦学
表面光洁度
共焦激光扫描显微镜
表面能
能量色散X射线光谱学
光学显微镜
热分析
作者
Qichang Guo,Chuanbo Liu,Juncheng Lv,Shuo Liu
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2026-03-16
卷期号:18 (6): 716-716
被引量:1
标识
DOI:10.3390/polym18060716
摘要
The drive systems of new energy vehicles, which employ high-speed motors and low-viscosity lubricants, often subject motor bearings to high-temperature and oil-starved conditions. This can lead to the deformation of polymer bearing cages, resulting in abnormal vibration and noise. In this study, polyimide/molybdenum disulfide (PI/MoS2) composites were prepared, and their thermal stability was characterized using a dynamic mechanical analysis (DMA). High-temperature friction and wear tests against ceramic balls were conducted on a multifunctional tribometer. The wear behavior and surface element distribution were examined by laser confocal microscopy (LCSM), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). Results indicate that the PI-MoS2 composites effectively mitigate surface contact deformation with rising temperatures, reducing the wear loss by around 30% compared to pure PI. This improvement is attributed to the enhanced heat resistance from MoS2 and the formation of a lubricating film during friction. The findings provide guidance for selecting and designing composite materials for high-speed bearing cages.
科研通智能强力驱动
Strongly Powered by AbleSci AI