Produced water treatment and recycling are critical for the sustainable operation of steam-assisted gravity drainage (SAGD) processes used to extract bitumen from oil sands. Silica accumulation in produced water can lead to severe scaling in pipelines, steam generators, and processing equipment, resulting in reduced operational efficiency and increased maintenance costs. However, effective silica removal remains challenging due to its low solubility, strong colloidal stability, and the limited understanding of its interactions with treatment chemicals. In this study, silica removal during warm lime softening (WLS) and the subsequent coagulation-flocculation process was systematically investigated, with particular emphasis on the role of chemical additives and precipitated solids. The results show that silica preferentially associates with magnesium hydroxide precipitates, forming semi-shell-like structures that act as scaffolds for particle aggregation. Interfacial interaction measurements reveal that poly (diallyldimethylammonium chloride) (polyDADMAC), as the most effective coagulant, significantly enhances particle adhesion and aggregation, thereby promoting sedimentation and improving silica removal efficiency. The evolution of silica-bearing precipitates and the associated interfacial interactions provide new insights into the underlying treatment chemistry. These findings advance the mechanistic understanding of silica removal in SAGD produced water treatment and offer guidance for the design of more efficient chemical additives, enabling improved treatment performance and reduced energy consumption in SAGD water recycling systems.