钙钛矿(结构)
材料科学
钝化
图层(电子)
能量转换效率
热稳定性
碘化物
化学工程
光电子学
纳米技术
卤化物
活动层
热的
光伏系统
作者
Koushik Gayen,Prasun Kumar,Nagendra S. Kamath,Ranbir Singh,Suman Kalyan Pal
标识
DOI:10.1021/acsaem.6c00285
摘要
Despite achieving high power conversion efficiency (PCE), the large-scale commercialization of perovskite solar cells (PSCs) remains limited by the poor stability of three-dimensional (3D) perovskites. Here, a two-dimensional (2D) perovskite-based interface engineering strategy is employed to improve device stability. A thin capping layer of 2D perovskite, 4-fluorobenzylammonium lead bromide ((4-FBA) 2 PbBr 4 ) is deposited on the 3D mixed-cation methylammonium–formamidinium lead iodide (MAFAPbI 3 ) perovskite layer. The incorporation of this 2D layer significantly improves the film morphology, suppresses trap-state density, and enhances environmental robustness. The optimized 3D/2D hybrid device achieves PCEs of 18.40% under 1 sun and 34.54% under indoor LED illumination (1000 lux). Notably, the device exhibits enhanced stability, retaining 77.82% of its initial efficiency after thermal heating at 80 °C for 10 h and 55.32% after 30 days of storage under ambient air. These results highlight the efficacy of interfacial passivation engineering in developing high-performance and stable PSCs for both outdoor and indoor applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI