转速
材料科学
微观结构
搅拌摩擦焊
铝
焊接
合金
对接接头
冶金
粒度
接头(建筑物)
降水
透射电子显微镜
复合材料
机械工程
结构工程
纳米技术
物理
工程类
气象学
作者
Biplab Ghosh,Hrishikesh Das,Asis Samanta,Jyotsna Dutta Majumdar,Manojit Ghosh
标识
DOI:10.1088/2631-8695/ac4a48
摘要
Abstract The present investigation intends to interpret the effect of tool rotational speed on the mechanical properties and microstructural evolution in Aluminium 6061-T6 alloy during friction stir welding. A higher value of tool rotation produces more hardness at the nugget zone, which is attributed to the higher intensity of reprecipitation at higher rpm, revealed by transmission electron microscopy. The nugget zone is revealed as a nearly precipitate-free region, while the thermo-mechanically affected zone contains coarse precipitates, deformed and dynamically recovered grains with a few recrystallized grains. Significant reduction in grain size in the stirred zone is also a key finding. The observations depict the dependence of microstructure, and thus mechanical behaviour on tool rotational speed. A specific combination of process parameters has been determined from experiments, which corresponds to the maximum joint efficiency.
科研通智能强力驱动
Strongly Powered by AbleSci AI