材料科学
煅烧
形态学(生物学)
化学工程
破损
相(物质)
血小板
空化
复合材料
化学
有机化学
催化作用
遗传学
物理
机械
工程类
免疫学
生物
作者
Soumavo Sikder,Satyanarayana Sabat,Shantanu K. Behera,Arindam Paul
标识
DOI:10.1016/j.ceramint.2021.12.334
摘要
It is of utmost importance to control the size and morphology of anisotropic α-Al 2 O 3 platelets owing to its extensive usage in various applications, including most recent synthetic biomimetic abalone nacre-like composites. In the present article, a wide range of well-developed and well-dispersed α-Al 2 O 3 platelets were produced with diameter and thickness ranging from 4 - 8 μm and 0.6–1 μm respectively, by taking γ-Al 2 O 3 precursor and sodium sulfate as low melting flux. The effects of various processing parameters like calcination temperatures, molar ratios of Al/Na and soaking time on the phase formation and morphology development of the final platelets were investigated in rigor. The results indicated that high calcination temperature of 1200 °C and moderate soaking time (60 min) helped to develop α-Al 2 O 3 platelets with hexagonal morphology and uniform sizes. The sulfate salts created favorable conditions for growth of anisotropic platy α-Al 2 O 3 and Al/Na molar ratio has significant effect in controlling the aspect ratio of the platelets. The impact of deagglomeration treatment by the ultrasound irradiation on the calcined aggregates of platelets was also examined. The breakage of platelets clusters by fracture/erosion due to the interaction with imploding cavitation bubbles under ultrasound energy, reached maximum after 90 min of deagglomeration treatment. The detail phase transformation sequences from γ-Al 2 O 3 to α-Al 2 O 3 was explained by correlating thermal (DT-TGA) and X-ray analysis. The growth mechanism of the anisotropic α-Al 2 O 3 particles in the presence of molten Na 2 SO 4 liquid was also unraveled.
科研通智能强力驱动
Strongly Powered by AbleSci AI