生物相容性
材料科学
气凝胶
多孔性
聚酯纤维
组织工程
化学工程
涂层
脚手架
聚合
溶剂
复合材料
聚合物
化学
有机化学
生物医学工程
冶金
工程类
医学
作者
Ramona Orlacchio,Simona Zuppolini,Iriczalli Cruz‐Maya,Stefania Pragliola,Anna Borriello,Vincenzo Guarino,R. Fittipaldi,Mariateresa Lettieri,Vincenzo Venditto
出处
期刊:Molecules
[Multidisciplinary Digital Publishing Institute]
日期:2022-03-25
卷期号:27 (7): 2137-2137
被引量:11
标识
DOI:10.3390/molecules27072137
摘要
Poly-L-lactic acid (PLLA) aerogel-based scaffolds were obtained from physical PLLA gels containing cyclopentanone (CPO) or methyl benzoate (BzOMe) molecules. An innovative single step method of solvent extraction, using supercritical CO2, was used to achieve cylindrical monolithic aerogels. The pore distribution and size, analyzed by SEM microscopy, were found to be related to the crystalline forms present in the physical nodes that hold the gels together, the stable α'-form and the metastable co-crystalline ε-form, detected in the PLLA/BzOMe and PLLA/CPO aerogels, respectively. A higher mechanical compressive strength was found for the PLLA/CPO aerogels, which exhibit a more homogenous porosity. In vitro biocompatibility tests also indicated that monolithic PLLA/CPO aerogels exhibited greater cell viability than PLLA/BzOMe aerogels. An improved biocompatibility of PLLA/CPO monolithic aerogels was finally observed by coating the surface of the aerogels with polydopamine (PDA) obtained by the in situ polymerization of dopamine (DA). The synergistic effect of biodegradable polyester (PLLA) and the biomimetic interface (PDA) makes this new 3D porous scaffold, with porosity and mechanical properties that are tunable based on the solvent used in the preparation process, attractive for tissue engineering applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI