内压
弯曲
材料科学
有限元法
结构工程
腐蚀
复合数
复合材料
失效模式及影响分析
工程类
作者
Yong Bai,Songhua Liu,Peihua Han,Weidong Ruan,Gao Tang,Yu Cao
标识
DOI:10.1080/17445302.2018.1434114
摘要
Plastic pipe reinforced by steel wires (PSP) is a new kind of composite pipe, which has the advantages of corrosion-resistant, light weight and low cost. Generally, the middle layer of PSP includes helically wound high-strength steel wires as enhanced body and high-density PE as a matrix. In the engineering practice, this kind of composite pipe endures combined bending and internal pressure. Thus, it is of great importance to investigate the burst pressure of PSP under this load condition. In this paper, a full-scale laboratorial test of PSP under combined bending and internal pressure was carried out. A finite-element model (FEM) was established to study the mechanical behaviour and failure mode. In addition, we deduced a simple but effective formula for calculating the burst pressure of PSP under combined bending and internal pressure. The results obtained from the three methods show a good agreement.
科研通智能强力驱动
Strongly Powered by AbleSci AI