材料科学
碳化物
贝氏体
微观结构
冶金
猝灭(荧光)
韧性
降水
动火作业
工具钢
马氏体
气象学
荧光
物理
量子力学
出处
期刊:Transactions of the Iron and Steel Institute of Japan
[The Iron and Steel Institute of Japan]
日期:1987-01-01
卷期号:27 (1): 51-59
被引量:37
标识
DOI:10.2355/isijinternational1966.27.51
摘要
Microstructures of hot work tool steels, AISI H13, HIO, and H19 tempered after quenching at various cooling rates are studied for improvements of the toughness of these steels. It is found that the development of upper bainite with decreasing rate of quenching is accompanied by the following microstructural changes.1) Increase in the width and length of bainite grains and the effective grain size2) Preferential precipitation of carbides along prior austenitegrain boundaries3) Dispersion of fine carbides in matrixThese microstructural changes lead to reduction of the toughness in all the steels; deterioration occurs in H10 and H19 at a higher cooling rate than in H13. The toughness value reduces in the order of H13, H10, and H19, in good correlation with increasing order of the density of frne carbides in matrix and the fraction of retained carbides.
科研通智能强力驱动
Strongly Powered by AbleSci AI