Structure and properties of polyurethanes based on halogenated and nonhalogenated soy-polyols

Four polyols were prepared by a ring opening of epoxidized soybean oil with HCl, HBr, methanol, and by hydrogenation. Two series of polyurethanes were prepared by reacting the polyols with two commercial isocyanates: PAPI and Isonate 2143L. Generally, the properties of the two series were similar. The crosslinking density of the polyurethane networks was analyzed by swelling in toluene. Brominated polyols and their corresponding polyurethanes had the highest densities, followed by the chlorinated, methoxylated, and hydrogenated samples. The polyurethanes with brominated and chlorinated polyols had comparable glass transition and strength, somewhat higher than the polyurethane from methoxy containing polyol, while the polyurethane from the hydrogenated polyol had lower glass-transition and mechanical properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4062–4069, 2000