木质素
吸附
X射线光电子能谱
氮气
选择性
多孔性
兴奋剂
解吸
碳纤维
材料科学
摩尔分数
化学工程
微型多孔材料
化学
有机化学
物理化学
复合材料
催化作用
工程类
复合数
光电子学
作者
Dipendu Saha,Scott E. Van Bramer,Gerassimos Orkoulas,Hoi Chun Ho,Jihua Chen,Dale K. Henley
出处
期刊:Carbon
[Elsevier BV]
日期:2017-05-30
卷期号:121: 257-266
被引量:167
标识
DOI:10.1016/j.carbon.2017.05.088
摘要
Nitrogen-doped and hierarchical porous carbons were synthesized from lignin precursor by KOH and NH3 activation with BET surface area of 1631–2922 m2/g. X-ray photoelectron spectroscopy (XPS) revealed 5.6–7.1 at.% nitrogen with predominantly pyridinic, amino and pyrrolic/pyridonic type of functionality. Maximum CO2 adsorption capacity at 298 K and 273 K and pressure upto 760 torr (1 bar) was found to be 5.48 and 8.6 mmol/g respectively, which is higher than that of majority of nitrogen-doped carbons, reported in literature. Ideal Adsorbed Solution Theory (IAST)-based selectivity for CO2/N2 revealed that selectivity increases with the increase in nitrogen content. IAST calculations were also employed to calculate the binary adsorption isotherms to simulate mixed gas adsorption for CO2 and N2 as a function of total pressure and mole fraction of CO2 in the gas mixture. Continuous CO2 adsorption-desorption studies for 10 cycles revealed that all the nitrogen-doped carbons retained its working capacity at the end of the cycles. Finally, a breakthrough study for (10/90) CO2/N2 mixture in a dynamic column experiment confirmed a physical separation of the two components. The overall results suggest that nitrogen-doped carbons from lignin can be used as potential adsorbents for CO2 capture purposes.
科研通智能强力驱动
Strongly Powered by AbleSci AI