材料科学
复合材料
惰性
陶瓷
复合数
抗弯强度
制作
陶瓷基复合材料
热导率
热解
最大相位
化学工程
病理
工程类
物理
医学
量子力学
替代医学
作者
Jin Shan Yang,Shao Ming Dong,Ping He,Qing Gang Li,Bin Wu,Jian Hu,Zhi Hu
出处
期刊:Key Engineering Materials
[Trans Tech Publications]
日期:2012-06-01
卷期号:512-515: 681-684
被引量:15
标识
DOI:10.4028/www.scientific.net/kem.512-515.681
摘要
Because of its combined characteristics of metals and ceramics, such as low density, high Young’s modulus, thermal and chemical resistance with low hardness, high electrical and thermal conductivity, it was expected that the introduction of Ti3SiC2 to fiber reinforced ceramic matrix can make the composite own some unique properties. In the present research, Ti3SiC2 powders used as inert fillers were fabricated by the in-situ reaction between Ti and polycarbosilane mixtures. The purity of Ti3SiC2 powders analyzed by XRD was determined by RIR method, which is a semi-quantitative XRD analysis. The results showed that the purity of Ti3SiC2 powders is about 96%. Cf/Ti3SiC 2-SiC composites are obtained by polymer infiltration and pyrolysis process using Ti3SiC2 powders as the inert fillers. The bending strength of Cf/Ti3SiC2-SiC composites was about 160 MPa.
科研通智能强力驱动
Strongly Powered by AbleSci AI