材料科学
棒
轴对称性
复合材料
疲劳极限
结构工程
复合数
极限抗拉强度
压力(语言学)
冶金
低周疲劳
碳钢
压缩(物理)
疲劳试验
有限元法
产量(工程)
作者
Maurer, Bruno,Ernst Gehri,Thomas Strahm,René Steiger,Christian Affolter
出处
期刊:Swiss Federal Laboratories for Materials Science and Technology (Empa) - DORA Empa
[Empa]
日期:2022-04-29
被引量:1
摘要
Bonded-in profiled rods are among the most efficient fasteners in modern timber construction. Especially under axial loading, they are characterised by high load-carrying capacity and high stiffness. In addition, connections with steel rods can be designed to exhibit ductile failure, so that the brittle failure modes of wood in connections and reinforcements are excluded. For bridges, fatigue can be a critical ultimate limit state. Starting from the desired design value of a rod in practice, in this paper the required load level for the typical connection configuration is derived. Based on experiments, it is shown how the undesired mixed failure modes can be avoided. The effect of the loading frequency and the corresponding temperature rise in the specimen are presented and discussed. The results of the experimental campaign confirm the appropriate performance of the bonded-in rod system under the tested conditions.
科研通智能强力驱动
Strongly Powered by AbleSci AI