Effect of dielectric barrier discharge plasma on persulfate activation for rapid degradation of atrazine: Optimization, mechanism and energy consumption

Dielectric barrier discharge plasma (DBDP) is an emerging and promising advanced oxidation process (AOP) for wastewater treatment. After investigating the effect of input voltage, O3 (generated by dielectric barrier discharge), and peroxydisulfate (PDS) dosage, the DBDPO3/PDS system was established. With the assistance of PDS, the atrazine (ATZ) removal efficiency increased from 69.67% to 82.46% within 25 min. Synergistic effect calculation suggests that there were markedly synergies between DBDP, O3, and PDS. Under the effect of SO4−•, the total organic carbon (TOC) removal and dechlorination efficiency were significantly improved. In addition, the DBDPO3/PDS system maintained the ATZ removal efficiency at a high level over a wide range of initial pH values. According to quenching experiments and electron paramagnetic resonance (EPR) detection, the dominant radical for ATZ degradation in the DBDPO3/PDS system was HO•. A possible degradation pathway of ATZ was proposed based on density functional theory (DFT) analysis, quadrupole-time of flight-liquid chromatography/mass spectrometry (Q-TOF-LC/MS) results, and related literature. The acute toxicity to aquatic minnows and the developmental toxicity of intermediate products prediction confirmed that the DBDPO3/PDS system could effectively reduce ATZ toxicity. The electrical energy per order (EEO) was 7.10 kWh m−3 order−1 illustrating that the DBDPO3/PDS was a more energy-economic system than other energy-intensive processing technologies.