多物理
水溶液
萃取(化学)
微流控
吸收(声学)
体积流量
微波食品加热
双水相体系
材料科学
体积热力学
传热
工作(物理)
相(物质)
热力学
分析化学(期刊)
化学
色谱法
有机化学
纳米技术
物理
复合材料
有限元法
量子力学
作者
Tai-Ying Chen,Montgomery Baker-Fales,Himanshu Goyal,Dionisios G. Vlachos
标识
DOI:10.1021/acs.iecr.1c04859
摘要
Microwaves (MWs) can enable the electrification and intensification of chemical manufacturing. They have been applied to various unit separations, such as drying, distillation, and extraction, entailing gas–liquid and solid–liquid systems. However, a limited quantitative understanding of MW-heated liquid–liquid biphasic systems related to extraction exists. This work measures the temporal and spatial temperature difference between an aqueous and an organic phase in batch and continuous microfluidic modes. We demonstrate permanent temperature differences between phases over 35 °C and spatiotemporal periodic and quasiperiodic oscillations modulated by the flow patterns. The temperature differences are primarily driven by the faster absorption rate of MW irradiation by the aqueous phase versus the slower heat transfer from the aqueous phase to the organic phase. These are amplified by low specific interfacial area and modifications of the electromagnetic field. We employ a multiphysics model to predict the temperature difference in a batch system. The model is in good agreement with the experiments. We demonstrate a strong effect of input power, dielectric properties of organic solvents, the volume of solvents, and the volume ratio between phases on the temperature difference. A simple analytical model describes the temperature difference and provides design principles. The combined approach offers new insights into the design and optimization of the MW-heated biphasic systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI