埃洛石
材料科学
热重分析
聚乳酸
复合材料
傅里叶变换红外光谱
差示扫描量热法
结晶度
扫描电子显微镜
聚己内酯
玄武岩纤维
挤压
纤维
聚合物
化学工程
物理
工程类
热力学
作者
Arputham Arul Jeya Kumar,NIRANJAN S. RAJ,C. SAIPRASAD,AGHALAYAM R. SUDHANVA
标识
DOI:10.1142/s0218625x22500378
摘要
This paper is focused on the analysis of the morphological and thermal properties of the biomedical composites, polylactic acid (PLA) and polycaprolactone (PCL) matrix, reinforced with basalt fibers (BFs) and using halloysite nanotubes (HNT) as filler material. Four different composites, viz. PPHB 1, PPHB 2, PPHB 3 and PPHB 4, are obtained by varying the weight fractions of these materials using twin-screw extrusion followed by injection molding. The morphological characterization is performed on these composites using scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. SEM reveals homogenous and strong bonding between the matrix, reinforcement and filler. The BF are well embedded in the matrix with a random orientation. No formation of voids and cracks is observed. The functional groups present and the types of vibration experienced by the chemical bonds were observed in the FTIR spectra. The composites are subjected to thermal testing such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The PPHB 2, which contains 80% PLA, 10% BF, 7% PCL and 3% HNT, has the highest degree of crystallinity, as revealed by DSC, and exhibits the most optimum thermal degradation characteristics as indicated by TGA.
科研通智能强力驱动
Strongly Powered by AbleSci AI