材料科学
合金
极限抗拉强度
脆性
金属间化合物
可塑性
延展性(地球科学)
铝化钛
无扩散变换
位错
打滑(空气动力学)
马氏体
复合材料
Twip公司
亚稳态
相(物质)
变形机理
加工硬化
冶金
延伸率
拉伸试验
各向异性
工作(物理)
形状记忆合金
结构材料
产量(工程)
作者
Chaohua Li,Yidong Wu,Boyuan Zheng,Xu Zhang,Xiongjun Liu,Wenli Song,Ning An,Chengbo Xiao,Xidong Hui
摘要
ABSTRACT Ordered aluminide intermetallics are promising lightweight structural materials but suffer from limited room‐temperature tensile ductility due to the constrained dislocation activity inherent to their ordered lattices. Here, we demonstrate that controlled reduction of phase stability can overcome this limitation in B2‐ordered Ti‐Zr‐V‐Al medium‐entropy intermetallics. By tailoring the Al content to lower the stability of the B2 matrix while preserving long‐range order, the metastable alloy activates an ordered transformation‐induced plasticity (ordered TRIP) effect under tensile loading. This involves the cooperative operation of {110}<111> slip and an unprecedented stress‐induced B2 to D0 19 ‐α 2 martensitic transformation. The transformation follows an orientation relationship of {0001}α 2 //{110}B2 and <11‐20>α 2 //<100>B2, representing an atypical pathway distinct from conventional B2→B19′ or B2→B33 transformations. The designed alloy achieves a tensile elongation of about 7%, an ultimate tensile strength of about 1.1 GPa, and a specific yield strength of about 197 MPa·g −1 ·cm 3 , a combination of strength, ductility, and density that surpasses most reported lightweight B2 intermetallics. By establishing a controlled metastability strategy that couples dislocation plasticity with a novel ordered martensitic transformation, this work provides a new paradigm for designing ductile, high‐strength ordered alloys and may inspire similar approaches in other brittle ordered alloy systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI