自愈水凝胶
羧甲基纤维素
有机溶剂
材料科学
环氧氯丙烷
化学工程
纤维素
水溶液
肿胀 的
木质素
热稳定性
氢氧化钠
热重分析
细菌纤维素
吸水率
牙髓(牙)
膨胀能力
动态力学分析
流变学
复合数
热分解
纳米纤维
复合材料
甲基纤维素
半纤维素
核化学
高分子化学
作者
Sa Rang Choi,Jae Yong Lee,Jin Ho Kim,Seo Hu Kim,Si Heon Kim,Si Heon Kim,Jung Myoung Lee
摘要
ABSTRACT Carboxymethyl cellulose (CMC) has been developed as a renewable material for highly absorbent hydrogels, but excessive swelling and insufficient network stability have limited its practical applications. Here, organosolv bamboo pulp containing approximately 20 wt% residual lignin was directly dissolved in aqueous sodium hydroxide (NaOH) and incorporated into CMC hydrogels without the need for cellulose purification or nanofibrillation. Composite hydrogels with different CMC/lignocellulose ratios were subsequently fabricated through epichlorohydrin crosslinking. The resulting hydrogels had high gel fractions of 88%–91%, while their water absorption ranged from 73 to 172 g/g. Rheological analysis revealed that increasing the lignocellulose content enhanced the initial network stiffness, whereas the 1:1 CMC/lignocellulose formulation exhibited the greatest resistance to deformation, reaching a maximum stress of 513 Pa at a strain of approximately 4990%. After swelling, the lignocellulose‐rich hydrogels retained a higher storage modulus, confirming the contribution of lignocellulose to network stability. Thermal analysis further showed that the maximum decomposition temperature increased from 295°C for LC‐25 to 348°C for LC‐100. Collectively, these results demonstrate that incorporating NaOH‐dissolved lignocellulose can improve the network stability of CMC hydrogels while preserving their high water‐absorption capacity.
科研通智能强力驱动
Strongly Powered by AbleSci AI