材料科学
纳米复合材料
聚吡咯
聚苯胺
膜
聚合物
原位聚合
化学工程
导电聚合物
电化学
电极
聚合
氟化物
复合材料
纤维素
化学
物理化学
生物化学
工程类
无机化学
作者
Manuel Salado,Senentxu Lanceros-Méndez,Erlantz Lizundia
标识
DOI:10.1016/j.eurpolymj.2020.110240
摘要
Abstract Different strategies have been reported to prepare electrode matrices to enhance the performance of electrochemical energy storage systems. In this work, electrode composite materials have been developed, combining intrinsic conductive polymers (ICP) such a polyaniline (PANI) and polypyrrole (PPy) into two different porous matrix, poly(vinylidene fluoride) (PVDF) and cellulose. With the aim to improve the cycling stability of the electrode materials, a thin coating of polydopamine (PDA) was applied, providing enhanced anchoring properties. Cellulosic and PVDF membranes are decorated by homogeneously distributed globular nanoparticles of PDA, PANI or PPy, resulting from the in-situ polymerization. Nanocomposites are characterized by good electrochemical performance owing to the large electrochemical active area and high structural stability benefiting from the synergetic effects between the substrate and PDA/PANI/PPy chains. A maximum capacity of 32 F·g−1 is achieved for cellulose based composites (scan rate of 10 mV·s−1). Composites are able to retain 96% of their initial capacity after 250 cycles, indicating an efficient doping/dedoping process. These results highlight the potential of cellulosic and PVDF membranes to fabricate flexible and hand-held energy storage materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI