Crystal structure of protoporphyrinogen IX oxidase: a key enzyme in haem and chlorophyll biosynthesis

Article1 April 2004free access Crystal structure of protoporphyrinogen IX oxidase: a key enzyme in haem and chlorophyll biosynthesis Michael Koch Corresponding Author Michael Koch Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Bayer CropScience AG, Research-Target Research, Monheim, Germany Search for more papers by this author Constanze Breithaupt Constanze Breithaupt Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Search for more papers by this author Reiner Kiefersauer Reiner Kiefersauer Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Proteros biostructures GmbH, Martinsried, Germany Search for more papers by this author Jörg Freigang Jörg Freigang Bayer CropScience AG, Research-Target Research, Monheim, Germany Search for more papers by this author Robert Huber Robert Huber Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Search for more papers by this author Albrecht Messerschmidt Corresponding Author Albrecht Messerschmidt Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Search for more papers by this author Michael Koch Corresponding Author Michael Koch Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Bayer CropScience AG, Research-Target Research, Monheim, Germany Search for more papers by this author Constanze Breithaupt Constanze Breithaupt Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Search for more papers by this author Reiner Kiefersauer Reiner Kiefersauer Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Proteros biostructures GmbH, Martinsried, Germany Search for more papers by this author Jörg Freigang Jörg Freigang Bayer CropScience AG, Research-Target Research, Monheim, Germany Search for more papers by this author Robert Huber Robert Huber Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Search for more papers by this author Albrecht Messerschmidt Corresponding Author Albrecht Messerschmidt Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany Search for more papers by this author Author Information Michael Koch 1,2, Constanze Breithaupt1, Reiner Kiefersauer1,3, Jörg Freigang2, Robert Huber1 and Albrecht Messerschmidt 1 1Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Martinsried, Germany 2Bayer CropScience AG, Research-Target Research, Monheim, Germany 3Proteros biostructures GmbH, Martinsried, Germany *Corresponding authors. Max-Planck-Institut für Biochemie, Abteilung Strukturforschung, Am Klopferspitz 18, 82152, Martinsried, Germany. Tel.: +49 89 8578 2669; Fax: +49 89 8578 3516; E-mail: [email protected] or E-mail: [email protected] The EMBO Journal (2004)23:1720-1728https://doi.org/10.1038/sj.emboj.7600189 PDFDownload PDF of article text and main figures. ToolsAdd to favoritesDownload CitationsTrack CitationsPermissions ShareFacebookTwitterLinked InMendeleyWechatReddit Figures & Info Protoporphyrinogen IX oxidase (PPO), the last common enzyme of haem and chlorophyll biosynthesis, catalyses the oxidation of protoporphyrinogen IX to protoporphyrin IX. The membrane-embedded flavoprotein is the target of a large class of herbicides. In humans, a defect in PPO is responsible for the dominantly inherited disease variegate porphyria. Here we present the crystal structure of mitochondrial PPO from tobacco complexed with a phenyl-pyrazol inhibitor. PPO forms a loosely associated dimer and folds into an FAD-binding domain of the p-hydroxybenzoate-hydrolase fold and a substrate-binding domain that enclose a narrow active site cavity beneath the FAD and an α-helical membrane-binding domain. The active site architecture suggests a specific substrate-binding mode compatible with the unusual six-electron oxidation. The membrane-binding domains can be docked onto the dimeric structure of human ferrochelatase, the next enzyme in haem biosynthesis, embedded in the opposite side of the membrane. This modelled transmembrane complex provides a structural explanation for the uncoupling of haem biosynthesis observed in variegate porphyria patients and in plants after inhibiting PPO. Introduction Protoporphyrinogen IX oxidase (PPO; EC 1.3.3.4) catalyses the oxidation of protoporphyrinogen IX to protoporphyrin IX by molecular oxygen (Figure 1A). PPOs represent a highly conserved family of enzymes, which are membrane associated supposedly by a hydrophobic conserved region (Arnould et al, 1999). In plants, there exist two isoforms of PPO, the plastidic PPO1 and the mitochondrial PPO2 (Lermontova et al, 1997); PPO1 is located in the thylakoid and in the envelope membranes of chloroplasts, and PPO2 is situated on the outer surface of the inner mitochondrial membrane (Ferreira et al, 1988). Ferrochelatase (Fc, EC 4.99.1.1) that inserts iron into the PPO product protoporphyrin IX is located on the inner surface of the inner mitochondrial membrane and in the thylakoid membrane of chloroplasts (Wu et al, 2001). It has been proposed that substrate channelling occurs between PPO and Fc (Ferreira et al, 1988). Figure 1.Reaction and inhibition of PPO. (A) Reaction scheme of PPO. Protoporphyrinogen IX is oxidised to protoporphyrin IX by molecular oxygen that is reduced to hydrogen peroxide. Hydrogen atoms eliminated during the reaction are written in bold letters. (B) Inhibitor INH: 4-Bromo-3-(5′-carboxy-4′-chloro-2′-fluoro-phenyl)-1-methyl-5-trifluoromethyl-pyrazol. Download figure Download PowerPoint PPO is the main target of light-dependent peroxidising herbicides like the diphenylether acifluoren (Lermontova et al, 1997). Inhibition of PPO leads to nonenzymatical formation of protoporphyrin IX, which is generated from protoporphyrinogen IX spontaneously by reaction with molecular oxygen. The uncoupling of protoporphyrin IX generation and iron insertion by ferrochelatase lead to a loss of feedback control of haem biosynthesis by the final product haem. The photosensitising protoporphyrin IX generates singlet oxygen that causes lipid peroxidation and cell death, leading to the observed bleaching of photosynthetically active parts of plants (Lermontova et al, 1997). Interestingly, humans become more sensitive to light, when the activity of PPO is reduced by mutations. The subsequent protoporphyrin IX enrichment causes the dominantly inherited metabolic disease variegate porphyria (Maneli et al, 2003). We have solved the crystal structure of the mitochondrial PPO2 from common tobacco (Nicotiana tabacum), a dimeric yellow protein with a molecular mass of ca. 55 kDa per monomer, at 2.9 Å resolution by selenium single anomalous diffraction. The protein was cocrystallised with the inhibitor 4-bromo-3-(5′-carboxy-4′-chloro-2′-fluoro-phenyl)-1-methyl-5-trifluoromethyl-pyrazol (INH, Figure 1B) and with a noncovalently bound FAD cofactor. Results and discussion The overall structure The 503 amino acids of PPO2 fold into a compact structure (Figure 2) in three domains, an FAD-binding, a substrate-binding and a membrane-binding domain (Figure 3A, Supplementary Figure 1). The first two domains display a p-hydroxybenzoate-hydroxylase (PHBH)-fold-like topology (Schreuder et al, 1992; Pawelek et al, 2000). The parts of the structure responsible for FAD binding (Supplementary Figure 2) show significant amino acid (aa) sequence and structural homologies to other flavoenzymes (Ghisla and Massey, 1989), like human monoamine oxidase B (Binda et al, 2002) (MAO B, 1.68 Å rmsd over 256 Cα atoms with 15.1% aa sequence identity), polyamine oxidase (Binda et al, 1999) (PAO, 1.71 Å rmsd over 190 Cα atoms with 14.9% aa sequence identity) and D-amino acid oxidase (Mizutani et al, 1996) (DAO, 1.98 Å rmsd over 148 Cα atoms with 14.9% aa sequence identity) and, furthermore, phytoene desaturase (PDS) (Norris et al, 1995) with 15.2% aa sequence identity, a plant enzyme involved in carotenoid biosynthesis (Supplementary Figure 3). Figure 2.Structure and sequence of mitochondrial PPO from N. tabacum. (A) Dimeric structure of PPO from N. tabacum. The three-domain monomer consists of an FAD-binding, a substrate-binding and a membrane-binding domain. The inhibitor INH (green) binds into the active site cavity near the cofactor FAD (red–orange). The product channel in the membrane-binding domain starts at the bound Triton X-100 detergent molecule (blue). In addition, residues involved in crystal contacts are shown. (B) Multiple amino-acid sequence alignment of eukaryotic PPOs: mitochondrial PPO2 from N. tabacum (NT, tobacco) and Arabidopsis thaliana (AT, Mouse Ear Cress), chloroplast PPO1 from N. tabacum and human mitochondrial PPO (HS). Red arrows mark residues in contact with the cofactor FAD and green arrows significant inhibitor-binding residues. The highly conserved membrane-binding residues 112–136 and 150–213 are surrounded by two black boxes. Below the alignment, the secondary structure elements (SSE) of PPO (in red and orange–yellow) are shown. The alignment was compiled with CLUSTALW (Thompson et al, 1994). (C) Stereo view of the membrane channel. The membrane-bound channel below the active site cavity (FAD—orange, INH—green) is shown with the lining residues (blue) behind the molecular surface and the bound detergent molecule (blue). Residues involved in crystal contacts are shown in orange. Download figure Download PowerPoint Figure 3.Arrangement of domains and subunits in the PPO structure. (A) Three-domain structure of PPO from N. tabacum (PPO2NT). The FAD-binding domain is shown in red, the substrate-binding domain is painted in green and the membrane-binding domain helices are shown in blue. Ligands are coloured as in Figure 1A. Helices α5 and α14 form the dimer interface, and the residues shown provide the crystal contacts. (B) Tetrameric assembly of PPO monomers in the crystal. The noncrystallographically related monomers A (red) and B (yellow) are shown with two of their crystallographically related partners monomers A′ (orange) and B′ (blue). Residues involved in crystal contacts are shown at the respective interfaces: the large interfaces of about 800 A2 between A and B (B′ and A′) and the small interfaces of about 400 A2 between A and B′ (A′ and B) building up the physiological dimer. Ligands are shown in the same colours as in Figure 1A. Download figure Download PowerPoint The dimer interface and membrane binding PPO2 is tightly bound to the inner mitochondrial membrane. The solubilisation and crystallisation of the recombinant protein are only possible after detergent extraction with Triton X-100. The apparent molecular mass of PPO2 in solution is 130 kDa as determined by size exclusion chromatography, indicating a dimer with a calculated molecular mass of ca. 110 kDa (data not shown). We suggest that the domain encompassing the eight helices α4–11 with the conserved sequence regions (Figure 2B) from residue 112 to 136 and from 150 to 213 is the membrane anchor and is monotopically (Blobel, 1980) inserted into the membrane reminiscent of the monotopic membrane proteins squalene-hopene cyclase (Wendt et al, 1999) and prostaglandine-H2 synthase (Loll et al, 1995). In PPO2 helices α4, α5 and α11 form the base of this domain with mostly apolar residues, which would face the lipid portion of the membranes. The wall of the cylindrical putative membrane-binding domain is lined up by a couple of negatively and positively charged residues, which may interact with positively and negatively charged head groups of the mitochondrial membrane phospholipids. In the crystals of PPO2, the putative membrane-binding domains of four protomers contact each other, forming two contacts that each bury 800 Å2 accessible surface area and perpendicular to these two more contacts with interface areas of 400 Å2 (Figure 3B). We suppose that the smaller interface corresponds to the natural PPO2 dimer, possibly further stabilised by phospholipids of the surrounding membrane in vivo. In the dimeric assembly of PPO2, the openings of the active site cavities are positioned on the outside of the dimer near the membrane leading to two independent active sites. The dimer interface is formed by the helices α14 and α5, with major contributions made by leucine residues of helix α5 that interact with the corresponding leucine residues of the second monomer (Figure 2A). Despite high overall structural homology with MAO B (Binda et al, 2002), dimerisation takes place at completely different surface parts in the two enzymes. It is unclear whether PPO2 is inserted into the membrane as a monomer or dimer. Both insertion modes are structurally possible. Putative complex with ferrochelatase The membrane-binding domain contains a U-shaped channel opened at one side leading from the active site into the membrane bilayer (Figure 2C). We suggest that protoporphyrin IX is translocated to dimeric Fc through this channel (Fc, Figure 4A). Fc has been proposed to be monotopically inserted into the membrane as a dimer with an arrangement seen in the crystal structure of human ferrochelatase (HFc) (Wu et al, 2001). In our model of the heterodimeric complex of the PPO2 and HFc dimers, the twofold axes of the two dimers were aligned and the protomers were rotated and shifted until the best fit is obtained (Figure 4B). The residues that form the interface match very well; residues 195–212 (α10 and α11) of PPO2 interact with residues 99–122 of HFc (large lip, helix from 104 to 122) and residues 131–137 (α5, PPO2) with residues 304–310 (small lip loop, HFc) (Wu et al, 2001). Interestingly, these interface residues of PPO are identical to those that give rise to the 800 Å2 crystal contact described above (Figure 4A). The part of the complex that is supposed to span the inner mitochondrial membrane has a length of 28 Å, corresponding well to the assumed width of 30 Å for the lipidic part of a membrane. An appealing feature of the model is the overlap of the channel openings of PPO2 and HFc, facilitating uninterrupted product/substrate diffusion from the active sites of the PPO2 dimer right into those of the dimeric HFc in the complex. In the complex, the uptake of protoporphyrinogen IX could occur from the periplasmic side through the opening beneath the active site cavity of PPO2, perhaps via a complex with coproporphyrinogen III oxidase that provides the substrate of PPO2 in animal mitochondria. After oxidation of protoporphyrinogen IX, the product could thus be channelled to the active site of Fc and after iron insertion released into the membrane via the lateral opening of the combined channels. The observation that iron insertion by Fc requires the presence of PPO (Ferreira et al, 1988) argues for a physiological complex between the two components. Figure 4.Supposed interaction mode of the last three enzymes in the human mitochondrial haem biosynthesis. (A) Localisation of coproporphyrinogen III oxidase (Santana et al, 2002) (CPO, EC 1.3.3.3, green), PPO (surface of the tobacco structure in yellow) and human ferrochelatase (Wu et al, 2001) (HFc, red) in the mitochondrial periplasm. CPO binds to the inner surface of the outer mitochondrial membrane in human mitochondria. PPO binds to the outer surface of the inner mitochondrial membrane and HFc to the opposite surface of the inner mitochondrial membrane. The dashed lines symbolise the channel within the PPO and HFc molecules where ligands can bind and the protoporphyrinogen IX and protoporphyrin IX are processed from PPO to HFc. From left to right, the reaction sequence is shown starting with protoporphyrinogen IX uptake by PPO from CPO (1), reaction to protoporphyrin IX in PPO and channelling to the active site of HFc (2), insertion of the iron into protoporphyrin IX resulting in protohaem or haem b (3) and its release into the membrane (4). The channel from PPO to HFc is opened towards the membrane at the PPO side of the PPO–HFc complex, so here it is possible for molecules to enter or leave the complex. One possibility how the final reaction step, that is, the release of haem, takes place is that haem leaves through the channel opening of the assembled complex as shown here. Alternatively, the complex that has been described as not very stable by Ferreira et al (1988) could disassemble after step2. (B) Stereo-view of the putative PPO–HFc complex, the PPO is shown in yellow, HFc in red. The channel in the complex is filled with the PPO inhibitor (INH, green) below the cofactor FAD (PPO, red–orange), the detergent molecules Triton X-100 (PPO-part of the channel, blue) and three cholate molecules (HFc, olive-green). The inner mitochondrial membrane is symbolised by black lines. Download figure Download PowerPoint The active site and structural basis of catalysis The active site of PPO is located between the FAD- and the substrate-binding domain. The electron density map (Figure 5A) shows the binding of the inhibitor INH in the active site cavity (Figure 5B) near the FAD cofactor in its extended conformation. The substrate-binding site beneath the FAD is a flat cavity that is formed by a number of aromatic and aliphatic amino acids as well as by Asn67 and Arg98 (Figure 5C). Below the inhibitor, there is well-defined electron density for a Triton X-100 molecule. It is located in the product channel, with the polar diethyleneoxide moiety directed towards the active site. Two further electron density maxima are found deeper in the channel, which could represent two less well-defined detergent molecules. This channel may also be a putative binding site for ubiquinone when it inhibits the PPO reaction in concentrations above 30 μM as described previously (Ferreira and Dailey, 1988). Ubiquinones, which are membrane-bound, could enter the channel from the membrane and inhibit the PPO reaction by steric hindrance of substrate binding and by blocking the channelling of the product. Figure 5.Active site of PPO. (A) The active site cavity with all ligands. The inhibitor INH (green) is shown with its electron density (steel blue) and is positioned by the residues Arg98, Leu356, Leu372 and Phe392. The coordination of the cofactor FAD (red–orange) surrounded by the electron density (grass-green) resembles that of MAO (Binda et al, 2002) and PAO (Binda et al, 1999). The detergent molecule Triton X-100 (blue) has bound into the entrance of the product channel; the aliphatic trimethylethyl group of the octyl group is not defined in the electron density (gold–yellow). The omit electron density map is displayed at 1.0σ contour level. (B) Binding tunnel for FAD, substrate and Triton X-100. The adenosyl moiety of FAD (red–orange) is exposed to solvent, the active site cavity is opened towards the membrane. The FAD cofactor (red–orange), the inhibitor INH (green) and a Triton X-100 detergent molecule (blue), which bind into the tunnel, are shown. (C) Surface representation of the active site cavity. The active site cavity is very narrow and the substrate is held tightly by ionic interaction of one propionyl oxygen from ring C with NH2 of Arg98, by stacking of ring B between Leu356 and Leu372 and by aromatic stacking interaction of ring A with Phe392, thus rotation of the substrate during the reaction is unlikely. (D) Active site cavity with bound FAD (red–orange), inhibitor INH (light green) and the modelled substrate protoporphyrinogen IX (PRP, green) and the product protoporphyrin IX (POP, cyan). The FAD-N5 atom, responsible for the hydride abstraction from the methylene bridge between ring A and D (C20 atom), is close to the C20 atom. Download figure Download PowerPoint We have modelled the binding of protoporphyrinogen IX and protoporphyrin IX guided by the INH-binding site (Figure 5D). The negatively charged propionyl groups are oriented towards the solvent-exposed parts of the active site cavity. Arg98 being highly conserved over all eukaryotic PPOs provides a counter charge for the carboxylate group of the inhibitor INH and most likely also for the propionate group of ring C of protoporphyrin(ogen) IX. The pyrazole ring of INH serves as a model for ring A of protoporphyrin(ogen) IX, and is kept in position by aromatic stacking with residue Phe392 conserved in the mitochondrial plant enzymes. In the chloroplast isoenzymes, a tyrosine residue replaces it. The phenylring of the INH mimicking ring B of protoporphyrin(ogen) IX is sandwiched between the conserved residues Leu356 and Leu372. The methylene bridge (C20) between rings A and D of the modelled protoporphyrinogen IX is oriented towards the reactive N5 atom of the FAD, giving rise to the assumption that this position is initially oxidised by the FAD. Further oxidation can proceed from this position only as the narrow active site cavity allows binding of protoporphyrinogen IX only in this orientation and precludes rotations of the substrate. By hydrogen rearrangements through imine–enamine tautomerisations, all hydride abstraction reactions occur from C20. The atom C10 between rings B and C cannot be oriented close enough to the N5 atom of the FAD because of the interfering vinyl group on the C10 side of the molecules. The FAD is reoxidised three times by molecular oxygen, yielding three hydrogen peroxide molecules (Jordan, 1991) (Figure 6). No conserved residue is observed near the substrate that could serve as a base. A possible mechanism of deprotonation would include reduction of molecular oxygen by a negatively charged FADH− to yield a peroxide anion, which could then serve as a base and this could abstract a proton from the substrate molecule. Figure 6.Proposed reaction mechanism of PPO. The oxidation of protoporphyrinogen IX to protoporphyrin IX occurs in three steps, whereby each time the FAD cofactor is reduced by the tetrapyrrol ring and reoxidised by an oxygen molecule that is reduced to hydrogen peroxide. The reaction always starts at the C20 atom of the tetrapyrrol ring by hydride transfer, followed by hydrogen rearrangements that take place in the whole ring system by enamine–imine tautomerisations (Jordan, 1991). Download figure Download PowerPoint Variegate porphyria In humans, a defect in PPO resulting in decreased enzymatic activity is responsible for the dominantly inherited disorder variegate porphyria, whose most obvious sign is the light sensitivity of the patient's skin. In more than 94% of the patients, Arg59 is mutated to Trp (Maneli et al, 2003). The residue in the tobacco mitochondrial enzyme that corresponds to human Arg59 conserved in mouse and Drosophila is Asn67 conserved in all known plant enzymes (Figure 2B). Asn67 is positioned on a loop between the isoalloxazine ring of FAD and the substrate-binding site. A bulky tryptophane residue at this position may disturb the protein structure in the active site and interfere with FAD and substrate binding. An Arg59Lys mutant of human PPO showed more than one-third of the wild-type enzyme activity, while Arg59Ser and Arg59Ile mutants were nearly inactive (Maneli et al, 2003). In animal PPOs including human PPO, the conserved Arg59 plays an important role. In the N. tabacum structure of PPO, Ser374 that is conserved between various plant species (Figure 2B) is in a position opposite to Asn67. The corresponding residue in animal PPOs is the conserved Asp349 that is likely to form a salt bridge with Arg59. This salt bridge is stabilising the active site structure. Mutating Arg59 to an uncharged residue disrupts this salt bridge, destabilising the active site structure of animal PPO. Materials and methods Protein expression, crystallisation, crystal transformation and structure solution Recombinant thioredoxin- and his-tagged protein was produced with Escherichia coli strain B834(DE3) containing the vector pET32a-ppo2nt(M1-, K224Q), and the mass was verified by mass spectroscopy. SeMet-Protein was expressed in New Minimal Media (NMM, Budisa et al, 1995) as described (Budisa et al, 1997). The three-step purification included Ni-NTA, proteolytic cleavage of the tags, size exclusion chromatography (S-200) and anion exchange chromatography via ResourceQ. SeMet-Protein in 5 mM Tris/HCl, pH 8.0, 0.1% Triton X-100 and 50 mM sodium chloride was crystallised at 18°C using the vapour diffusion method and 10% polyethylene glycol 1000, 0.1 M sodium citrate/HCl, pH 4.0, 0.2 M sodium chloride, as crystallisation solution. Long yellow crystals (150 × 100 × 100 μm3) appeared within 2 days and belonged to space group C2221 with cell parameters a=119.1 Å, b=147.3 Å and c=127.0 Å, corresponding to two monomers per asymmetric unit. Crystals only showed reflections up to 8 Å, but by transforming them with a free-mounting system (Kiefersauer et al, 2000) (Proteros biostructures GmbH, Martinsried) they diffracted up to 2.9 Å using synchrotron radiation. A complete single-wavelength anomalous diffraction experiment was performed with the SeMet crystals at the high-brillance beamline ID29 at the European Radiation Synchrotron Facility (ESRF). Direct methods using SnB (Weeks and Miller, 1999) yielded 14 out of the 18 theoretical selenium sites. Phases were calculated by the single anomalous diffraction technique with SHARP (delaFortelle and Bricogne, 1997). Data statistics are shown in Table I. Table 1. Data collection, phasing and refinement statisticsa Data set PPO2NT SeMet Resolution (Å)b 20–2.9 (3.0–2.9) Unit cell (Å) 119.09/147.25/127.04 Wavelength (Å) 0.9790 I/σ(I) 11.6 (2.8) Completeness of data (%) 99.3 (100.0) Multiplicity 3.8 (3.8) Rmerge (%)c 7.9 (52.8) Phasing procedure Anomalous scatterer 14 Se Phasing power anod 1.13 Rcullis anoe 0.79 Figure of merit 0.51 Model refinement Resolution (Å) 20–2.9 Number of reflections Rcryst/Rfree 23 234/1187 Number of protein atoms/ligand atoms/solvent molecules 6962/192/143 Mean temperature factors (protein/ligand/solvent) 67.7/60.7/57.2 Rmsd (bonds (Å)/angles (°)/bonded Bs (Å2))f 0.008/1.3/1.5 Ramachandran most favoured/disallowed (%) 82.6/0.0 R-factors: Rcryst/Rfree (%)g 22.7/29.3 All values refer to anomalous diffraction. The diffraction data were processed and scaled with the program XDS (Kabsch, 1993). Refinement of heavy atom parameters, phase calculation and solvent flattening were done with SnB (Weeks and Miller, 1999), SHARP (delaFortelle and Bricogne, 1997) and SOLVE (http://www.ccp14.ac.uk/solution/macromolecular-software/). The stereochemistry of the model was validated with PROCHECK (Laskowski et al, 1993). b Data of the last resolution shell are given in brackets. c Rmerge=∑h ∑i∣Ii(h)−〈I(h)〉∣/∑h∑iIi(h). d Phasing power is the mean value of the heavy atom derivative structure factor amplitude divided by the residual lack of closure error. e Rcullis=∑h∣ ∣Fph∣−∣Fp∣−Fh,calc∣/∑h∣Fph−Fp∣. f Root mean square deviations (rmsd) of temperature factors of bonded atoms. g Rcryst=∑h∣∣Fobs (h)∣−k ∣Fcalc (h)∣ ∣/∑hkl ∣Fobs (h)∣ for the working set of reflections; Rfree is the R-value for 5% of the reflections excluded from refinement. Model building and refinement The initial electron density map was two-fold averaged using AVE (Jones, 1992). Model building was carried out in the improved map with O (http://xray.bmc.uu.se/alwyn). Energy-restrained crystallographic refinement was carried out with maximum likelihood algorithms implemented in CNS (Brunger et al, 1998). Refinement proceeded in several cycles, which were interrupted for manual rebuilding with the program O (Jones et al, 1991). After the addition of solvent molecules, the refinement converged at an R-factor of 22.7% (Rfree=29.3%, Table I). Two regions are not defined in the electron density, namely residues 138–147 and residues 213–223. Four loops are not well defined, namely residues 148–149, 224–230, 272–278 and 286–292. All graphical representations were prepared using the programs MOLSCRIPT (Kraulis, 1991), BOBSCRIPT (Esnouf, 1999), RASTER3D (Merrit and Bacon, 1997), GRASP (Nicholls et al, 1993) and ALSCRIPT (Barton, 1993). Final Ramachandran plot analysis with the program PROCHECK (Laskowski et al, 1993) resulted in 82.6% residues in the most favoured regions, 15.3% residues in the additionally allowed regions, 2.1% residues in the generously allowed regions and no residues in the disallowed regions. For the superposition of the different 3D structures, the program LSQMAN (Kleywegt and Jones, 1994) was applied. Docking of the PPO–HFc complex The two-fold axes of the two dimers of PPO and HFc were aligned and the protomers were manually rotated and shifted until the best visual fit was obtained. The dimensions of the two channel parts and the two-fold axes in both enzymes fit very well (Supplementary Figure 4A and B), except for residues 209–213 from PPO, whose conformations are presumably influenced by crystal packing and that are not very well defined in the electron density. Molecular modelling of substrate and product binding Molecular modelling was pursued with modules Viewer, Builder and Discover3 of program Insight II (Version 98.0; Molecular Dimensions LtD, Los Angeles, 1998). The PPO2 X-ray structure was chosen as the starting point for the modelling and energy minimisation of the modelled complexes. The protoporphyrinogen IX and protoporphyrin IX molecules were generated with module Builder. The narrow substrate/product-binding pocket with its hydropho