Effect of Ni and Mn dopant on thermoelectric power generation performance of ZnO nanostructures synthesized via hydrothermal method

In this article, we have presented a low-cost hydrothermal approach to enhance the thermoelectric performance of ZnO nanostructures via modulation doping. For this purpose, we have prepared a series of pure and X:ZnO (X = Ni & Mn) samples. The Seebeck value of the Mn-doped samples possesses the maximum Seebeck coefficient of −36 μV/°C compared to the pure and Ni-doped samples (−22 μV/°C & −27 μV/°C) at room temperature. The highest value of the Seebeck coefficient for the Mn-doped samples is related to the formation of mid-gap energy band states due to the substitution of Mn2+ with Zn2+. These mid-band states induce an imbalance in the DOS, by producing a spin polarization effect that leads to a high Seebeck value. In terms of electrical conductivity, the Ni-doped ZnO sample exhibits the highest electrical conductivity of about 122 S/cm, due to the incorporation of Ni metal ions inside the ZnO matrix (confirmed by XRD) and leads to a high carrier concentration. However, the highest Seebeck value for the Mn-doped sample results in the maximum thermoelectric power factor ∼1.12 × 10−5 Wm−1C−2 at room temperature.