DUAL-BAND BANDSTOP FILTERS BASED ON ULTRA THIN FREQUENCY SELECTIVE SURFACES

In this paper, we present designs for terahertz filters with two independent stopbands based on periodic metallic resonant structures patterned on the dielectric substrate. Two simple and thin structures are proposed to realize required characteristics for single-polarized and dual polarized filter designs. To realize single polarized one, a unit cell of the proposed periodic structure consists of two sets rectangular shape conducting metal patches patterned on the top of the dielectric substrate, and the dual-band response is due the lattice resonances observed in the unit cell. To realize dual polarized filter design, a modified unit cell is considered with additional patches on the bottom of the dielectric substrate. The patches on the bottom layer are the same ones as on the top layer but orthogonally oriented. For this case, polarization-independent frequency response can be obtained after geometric optimization of the unit cell because the top and the bottom layers resonantly interact with only the TE or TM incident plane wave to minimize cross coupling effects between the layers. In order to intensively understand the transmission performance of the proposed filters, a large number of simulations using integral equation method are performed based on the different values for permittivity, period of the unit cell, dielectric thickness, and geometric dimensions. The electric field distributions are analyzed to understand the mechanism of the resonance behavior.