停留时间
悬臂梁
前馈
失真(音乐)
物理
纳米技术
光电子学
材料科学
复合材料
控制工程
工程类
医学
CMOS芯片
临床心理学
放大器
作者
Barış Kavas,Lars Witte,Efe C. Balta,Michael R. Tucker,Mohamadreza Afrasiabi,Markus� Bambach
标识
DOI:10.1007/s40964-025-01270-7
摘要
Heterogeneous temperature distributions in additively manufactured metallic parts, particularly in laser powder bed fusion (PBF-LB/M), pose a major challenge to achieving high-quality components due to thermal distortions, microstructural inconsistencies, and shifts in the process window. This study introduces a physics-aware feedforward approach for regulating dwell time that effectively mitigates distortion in 3D-printed cantilevers by reducing thermal variations along the build direction. A fast, 1D finite volume method thermal simulation is employed to estimate the temperature profile throughout the build. The interlayer dwell time is dynamically adjusted based on a predefined thermal difference threshold between layers to minimize residual stresses and part deformation. Experimental validation on a cantilever beam geometry confirms that the adaptive dwell time strategy significantly reduces distortion compared to a constant dwell time approach. The proposed method enhances thermal stability while maintaining processing times, offering an efficient solution for distortion control in PBF-LB/M. These findings contribute to advancing process optimization strategies by integrating physics-based thermal modeling with feedforward control.
科研通智能强力驱动
Strongly Powered by AbleSci AI