Micrometer-scale single crystalline particles of niobium titanium oxide enabling an Ah-level pouch cell with superior fast-charging capability

Wadsley-Roth phase niobium titanium oxide (TiNb2O7) is widely regarded as a promising anode candidate for fast-charging lithium-ion batteries due to its safe working potential and doubled capacity in comparison to the commercial fast-charging anode material (lithium titanium oxide, Li4Ti5O12). Although good fast charge/discharge performance was shown for nanostructured TiNb2O7, the small size would cause the low electrode compensation density and energy density of batteries, as well as parasitic reactions. Fundamental understanding of the electrochemical lithium insertion/extraction process and the structural evolution for the micrometer-scale single crystalline TiNb2O7 (MSC-TiNb2O7) could provide insights to understand its inherent properties and possibility for fast-charging application. Here, we revealed the highly reversible structural evolution of the MSC-TiNb2O7 during the lithiation/delithiation processes. Interestingly, an ion-conductive lithium niobate interphase was in situ formed on the MSC-TiNb2O7 surface during the formation cycle, which could facilitate fast ion diffusion on the material surface and support fast electrochemical reaction kinetics. Experimentally, the MSC-TiNb2O7 delivered a high reversible capacity of 291.9 mA h g-1 at 0.5C with a high initial Coulombic efficiency (>95%), and showed superb rate capability with a reasonable capacity of 55.6 mA h g-1 under a high current density of 40C. An Ah-level pouch cell with a lithium cobalt oxide (LiCoO2) cathode exhibited 91.5% capacity retention at 3C charging rate, which revealed the significant role of high crystallinity and in situ formation of an ion conductive nano-interphase in realizing fast charging capability of practical TiNb2O7-based lithium-ion batteries.