催化作用
甲烷
蒸汽重整
碳纤维
产量(工程)
材料科学
氢
化学工程
制氢
摩尔比
响应面法
甲烷转化炉
化学
冶金
复合材料
有机化学
色谱法
复合数
工程类
作者
Maryam Meshksar,M. Farsi,Mohammad Reza Rahimpour
标识
DOI:10.1016/j.joei.2023.101344
摘要
In this research, three different structures of Ni–Ce/Al2O3 catalysts are synthesized, characterized, and tested in the steam reforming of methane (SRM) process for the first-time using response surface method (RSM) based on optimal custom for examining the SRM operating conditions. Independent variables listed as Ce content (0, 1.5, 3.0 wt%), Ni content (5, 15, 25 wt%), steam to carbon (S/C) molar ratio (1.5, 2.5, 3.5), SRM temperature (600, 650, 700 °C), and catalyst structure (bulk, hollow, and co-precipitated) are selected for investigation and optimization of CH4 conversion and H2 yield. Among several suggested optimized solutions in the design expert, hollow 17.70Ni-1.93Ce/Al2O3 catalyst is the best choice depicting the highest activity at lower operating conditions. The stability of optimized catalysts in different structures are compared experimentally at their optimized temperature and S/C ratio after being characterized via different techniques. The used samples are also characterized for evaluating the structural change and amount of deposited carbon on their surfaces after 12h time-on-stream. It is observed that hollow 17.70Ni-1.93Ce/Al2O3 has not only the highest CH4 conversion of 92.14% and H2 yield of 94.20% at 676 °C, but also depicts the highest stability which may due to its higher oxygen storage capacity (OSC) that prevents the accumulation of carbon on its surface.
科研通智能强力驱动
Strongly Powered by AbleSci AI