Modeling mass removal and sediment deposition in stormwater ponds using floating treatment islands: a computational approach

Abstract Floating Treatment Islands (FTIs) offers effective solutions for stormwater management, providing flood attenuation and pollutant removal capabilities. However, there remains a knowledge gap concerning their performance, specifically in terms of pollutant removal and sediment deposition. To address this gap, the present study employs Computational Fluid Dynamics (CFD) modeling to investigate the intricate interactions within FTI systems. Various FTI configurations are analyzed, considering mass removal through FTIs and sediment deposition. The findings demonstrate that FTIs have a significant influence on flow patterns and mass removal. Notably, FTIs enhance mass removal compared to the control case, with larger sediment particles exhibiting higher removal rates. The correlation between the short-circuit index and sedimentation in FTI ponds highlights the potential of FTIs as indicators of treatment efficiency. Furthermore, the study focuses on mass removal exclusively through the FTI root zones. The positioning of FTIs within the pond has a considerable impact, resulting in differences of up to 20% in mass removal. Moreover, the FTI configuration exerts a more pronounced influence on mass removal through FTIs than through sediment deposition alone. In cases where both processes occur simultaneously, the presence of FTIs lead to higher mass removal, primarily attributed to the FTIs themselves, particularly in the initial segment. Remarkably, certain FTI configurations enable mass removal exceeding 70% for large sediment particles, even with a pond length less than half of the original.