残余油
提高采收率
石油工程
致密油
材料科学
微尺度化学
混溶性
化学工程
注水(采油)
饱和(图论)
残余物
轻质原油
油到位
多孔介质
微模型
介孔材料
扩散
传质
洪水(心理学)
可视化
多孔性
地质学
润湿
水溶液
含水层
化学
环境科学
原油
作者
Lingli Zheng,Xinyu Bai,Wenlian Xiao,Bingqian Zhu,Jianchao Shi,Jitian Ren,Peng Song,Jiwei Wang,Yu Xu,Zhiyu Tian
出处
期刊:Energy & Fuels
[American Chemical Society]
日期:2025-10-12
卷期号:39 (42): 20315-20329
被引量:7
标识
DOI:10.1021/acs.energyfuels.5c04001
摘要
The successful application of advanced water flooding techniques common in low-permeability reservoirs is often impeded in tight oil formations due to the predominance of microscale and nanoscale pores. CO 2, owing to its superior injectivity and ability to achieve miscibility upon contact with crude oil, presents a promising enhanced oil recovery (EOR) method for such reservoirs. However, research on the pore-scale mobilization mechanisms during advanced CO 2 injection in tight oil reservoirs remains extremely scarce. This study investigates Chang 8 tight oil cores from the Ordos Basin through comprehensive experiments conducted at reservoir temperature. Experiments included immiscible CO 2 flooding, miscible CO 2 flooding, and advanced CO 2 injection, employing high-pressure microscopic visualization and nuclear magnetic resonance (NMR) long-core flooding. High-pressure microscopic visualization revealed that advanced CO 2 injection achieved the highest recovery factor, followed by miscible CO 2 flooding, with immiscible flooding exhibiting the lowest performance. During immiscible flooding, CO 2 entered pores as discrete gas bubbles, coalescing into clusters that displaced oil primarily through squeezing, leaving behind continuous oil sheets and isolated droplets. Miscible CO 2 flooding exhibited significant diffusion effects, extracting oil via swelling and extraction; residual oil manifested as minor continuous patches and thin films. Advanced CO 2 injection further enhanced mass transfer through improved diffusion, effectively mobilizing film-like residual oil. NMR long-core flooding confirmed that advanced CO 2 injection significantly improved the sweep efficiency, resulting in isolated residual oil distributions with minimal saturation differentials between the upstream and downstream core sections. Compared to miscible CO 2 flooding, advanced CO 2 injection increased the ultimate recovery by 10% and doubled the recovery from mesopores and micropores. Furthermore, the recovery factor for advanced CO 2 injection demonstrated a positive correlation with injection pressure, achieving optimal results at 1.2 times the minimum miscibility pressure (MMP). These findings confirm the significant technical advantages of advanced CO 2 injection for efficient tight oil development.
科研通智能强力驱动
Strongly Powered by AbleSci AI