Process and formulation parameters influencing the survival of Saccharomyces cerevisiae during spray drying and tableting

Probiotic microorganisms provide health benefits to the patient when administered in a viable form and in sufficient doses. To ensure this, dry dosage forms are preferred, with tablets in particular being favored due to several advantages. However, the microorganisms must first be dried as gently as possible. Here, the model organism Saccharomyces cerevisiae was dried by spray drying. Various additives were tested for their ability to improve yeast cell survival during drying. In addition, the influence of various process parameters such as inlet temperature, outlet temperature, spray rate, spray pressure and nozzle diameter was investigated. It was possible to dry the yeast cells in such a way that a substantial proportion of living microorganisms was recovered after reconstitution. Systematic variation of formulation and process parameters showed that the use of protective additives is essential and that the outlet temperature determines the survival rate. The subsequent compression of the spray-dried yeast reduced viability and survival could hardly be improved by the addition of excipients, but the tabletability of spray-dried yeast protectant particles was quite good. For the first time, loss of viability during compaction of spray-dried microorganisms was correlated with the specific densification, allowing a deeper understanding of the mechanism of cell inactivation during tableting.