可靠性(半导体)
循环神经网络
平均绝对百分比误差
功率(物理)
计算机科学
人工神经网络
控制理论(社会学)
可靠性工程
模拟
工程类
人工智能
量子力学
物理
控制(管理)
作者
Shiyi Liu,Dao Zhou,Chao Wu,Frede Blaabjerg
标识
DOI:10.1016/j.microrel.2021.114314
摘要
To obtain accurate lifetime evaluation with acceptable simulation time for fulfilling the total life cycle design criteria, this paper proposes a Recurrent Neural Networks (RNN) based model with the replacement of the Simulink model. It starts with the establishment of the Averaged Switch (AS) model and Averaged Fundamental (AF) model of the Permanent Magnet Synchronous Generators (PMSG) to calculate accumulated damage. Then, under the same mission profile, the junction temperature, rainflow counting and accumulated damage of the AS and AF model are calculated and compared. It can be noted that the AS model is more accurate to calculate the reliability of components, since both the big thermal cycles caused by load variations and the small thermal cycles due to the fundamental AC current are considered. However, it consumes more time compared to the AF model. To this end, the RNN model is proposed to substitute the most time consuming part of the system reliability evaluation procedure. With aid of proposed model, the consumed time can be greatly reduced compared with the Simulink model. In the end, a 1-hour case study is applied to verify the efficiency of the RNN model. The Mean Absolute Percentage Error (MAPE) of the testing case is 0.51% and the time for getting results in the RNN model is less than 1 s. Besides, an annual case is also implemented to verify the RNN model, which has an averaged 0.78% MAPE for the whole year.
科研通智能强力驱动
Strongly Powered by AbleSci AI