膜
渗透汽化
采出水
化学工程
乳状液
废水
化学
氧化物
水解
盐(化学)
色谱法
渗透
海水淡化
膜技术
环境工程
有机化学
环境科学
工程类
生物化学
作者
Khalfan Almarzooqi,Mursal Ashrafi,Theeran Kanthan,Ali Elkamel,Michael A. Pope
出处
期刊:Membranes
[Multidisciplinary Digital Publishing Institute]
日期:2021-06-26
卷期号:11 (7): 475-475
被引量:23
标识
DOI:10.3390/membranes11070475
摘要
Oil and gas industries produce a huge amount of wastewater known as produced water which contains diverse contaminants including salts, dissolved organics, dispersed oils, and solids making separation and purification challenging. The chemical and thermal stability of graphene oxide (GO) membranes make them promising for use in membrane pervaporation, which may provide a more economical route to purifying this water for disposal or re-use compared to other membrane-based separation techniques. In this study, we investigate the performance and stability of GO membranes cast onto polyethersulfone (PES) supports in the separation of simulated produced water containing high salinity brackish water (30 g/L NaCl) contaminated with phenol, cresol, naphthenic acid, and an oil-in-water emulsion. The GO/PES membranes achieve water flux as high as 47.8 L m−2 h−1 for NaCl solutions for membranes operated at 60 °C, while being able to reject 99.9% of the salt and upwards of 56% of the soluble organic components. The flux for membranes tested in pure water, salt, and simulated produced water was found to decrease over 72 h of testing but only to 50–60% of the initial flux in the worst-case scenario. This drop was concurrent with an increase in contact angle and C/O ratio indicating that the GO may become partially reduced during the separation process. Additionally, a closer look at the membrane crosslinker (Zn2+) was investigated and found to hydrolyze over time to Zn(OH)2 with much of it being washed away during the long-term pervaporation.
科研通智能强力驱动
Strongly Powered by AbleSci AI