材料科学
环氧树脂
复合材料
扫描电子显微镜
电导率
导电体
电场
电阻率和电导率
介电谱
聚苯乙烯
聚合物
电极
电气工程
物理化学
量子力学
化学
电化学
物理
工程类
作者
Zhiliang Han,Jinlu Wang,Qingliang You,Xueqing Liu,Biao Xiao,Zhihong Liu,Jiyan Liu,Yuwei Chen
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2021-11-05
卷期号:13 (21): 3826-3826
被引量:9
标识
DOI:10.3390/polym13213826
摘要
By using the low loading of the conductor filler to achieve high conductivity is a challenge associated with electrically conductive adhesion. In this study, we show an assembling of nickel-coated polystyrene (Ni@PS) microspheres into 3-dimensional network within the epoxy resin with the assistance of an electric field. The morphology evolution of the microspheres was observed with optical microscopy and scanning electron microscopy (SEM). The response speed of Ni@PS microsphere to the electric field were investigated by measuring the viscosity and shear stress variation of the suspension at a low shear rate with an electrorheological instrument. The SEM results revealed that the Ni@PS microspheres aligned into a pearl-alike structure. The AC impedance spectroscopy confirmed that the conductivity of this pearl-alike alignment was significantly enhanced when compared to the pristine one. The maximum enhancement in conductivity is achieved at 15 wt. % of Ni@PS microspheres with the aligned composites about 3 orders of magnitude as much as unaligned one, typically from ~10−5 S/m to ~10−2 S/m.
科研通智能强力驱动
Strongly Powered by AbleSci AI