光催化
煅烧
X射线光电子能谱
降级(电信)
水溶液
材料科学
催化作用
傅里叶变换红外光谱
核化学
降水
化学工程
复合数
土霉素
化学
有机化学
复合材料
电信
生物化学
抗生素
计算机科学
工程类
物理
气象学
作者
Daolong Zhang,Zheng Liu,Rongmei Mou
标识
DOI:10.1016/j.inoche.2022.109667
摘要
This study reported the photocatalytic degradation of Oxytetracycline (OTC) using WO3/ZnO catalysts, which was successfully synthesized by precipitation method followed by a calcination process. The prepared samples were characterized by SEM, TEM, EDS, BET, XRD, FTIR, XPS, EIS, UV–Vis, and PL spectroscopy. The effects of initial pH, the temperature of the solution, photocatalyst dosage, and OTC concentration on the degradation of OTC were investigated. The results showed that when the ratio of WO3 to ZnO was 1:3 and the calcination temperature was 500 °C, the material had the best photocatalytic activity. The increased photocatalytic activity was attributed to the coupling of WO3 and ZnO, which also reduced the recombination rate of photogenerated electron holes and improved UV light absorption. The photocatalytic efficiency would be inhibited when the initial concentration of OTC was too low or too high. The photocatalytic efficiency increased first and subsequently declined as the catalyst dosage was raised. A low-temperature environment was more conducive to photocatalytic degradation of OTC, and an alkaline pH was more beneficial for accelerating the process. WO3/ZnO was found to be stable for at least three cycles of reuse. Finally, the photocatalytic degradation mechanism of the WO3/ZnO composite was explored by free radical capture experiment and TOC analysis.
科研通智能强力驱动
Strongly Powered by AbleSci AI