To investigate the cause of peculiar tribological characteristics of diamond like carbon (DLC) film, a pin-on-disk test was carried out using hydrogen-free and hydrogen-containing DLC films. These DLC films were coated on the pin, and the disk made by a high-speed tool steel SKH51 was used for sliding material. Hydrogen-free DLC film was coated by a magnetron sputtering method, and hydrogen-containing DLC film was coated by PCVD. The pin-on-disk test showed that hydrogen-free DLC film softened by frictional heat is adhered to both of the own friction surface and the surface of the disk. This phenomenon is thought to be a reason of the low coefficient of friction of hydrogen-free DLC film. On the other hand, hydrogen-containing DLC film does not have adhesion on itself and the surface of the disk. In addition, hydrogen-containing DLC film damaged the surface of the disk, and showed high coefficient of friction.