环境科学
碳化作用
废物管理
冶金
水溶液
材料科学
原材料
制浆造纸工业
碳化
化学
作者
F. Schinnerl,S. Reiter,M. Lehner
出处
期刊:Cleaner waste systems
[Elsevier BV]
日期:2026-10-29
卷期号:15: 100593-100593
标识
DOI:10.1016/j.clwas.2026.100593
摘要
Direct aqueous carbonation of magnesia-rich feedstocks represents a promising route for permanent CO 2 storage via the formation of stable magnesium carbonate. Building on previous work, where brucite formation and limited carbonation efficiencies (15-36%) were observed for two magnesia-carbon refractories, this study investigated whether limited CO 2 availability within the liquid phase was the main rate controlling factor. Experiments were conducted in an improved reactor setup at 100 °C and 180 °C at CO 2 partial pressures of 20 and 11 bar, respectively, to evaluate the influence of temperature on CO 2 solubility and reaction kinetics. Additional experiments with NaHCO 3 additives were performed to address the effect of increased initial CO 2 availability. By optimizing gas introduction via a dip tube positioned at the stirrer vortex and employing a turbine impeller, carbonation efficiencies increased significantly to 75-93% at 180 °C, representing a 3- to almost 5-fold improvement compared to the 19-23% achieved under similar conditions in the previous reactor setup. Magnesite was identified as the dominant product phase, indicating that improved CO 2 mass transfer and dissolution into the aqueous phase eliminated earlier gas-supply limitations. Higher temperatures (180 °C) promoted faster kinetics and more complete carbonation, whereas experiments at 100 °C yielded metastable hydromagnesite. The results indicate that CO 2 transfer efficiency governs reaction rates and underscore the reactor design’s critical role in aqueous carbonation. Synopsis Advances in permanent CO 2 sequestration via aqueous carbonation to valorize magnesia-rich materials were achieved by highlighting the reactor design’s critical role in CO 2 transfer.
科研通智能强力驱动
Strongly Powered by AbleSci AI