衰减
叠加原理
衰减系数
材料科学
超声波传感器
声学
反演(地质)
波形
气泡
超声波检测
光学
反变换采样
无损检测
准确度和精密度
超声衰减
反问题
体积分数
计量学
观测误差
散射
反射系数
质量衰减系数
计量系统
作者
Ying Xia,Yayu Li,Shiyuan Chang,Tonghai Wu,Pan Dou,Yaguo Lei
标识
DOI:10.1109/tim.2026.3671922
摘要
Attenuation coefficient is a critical parameter in ultrasonic-based detection of the gas content in lubricating oils. However, due to echoes overlapping, it remains a challenge to detect real-time bubble-content in a lubricating film accompanied by varied film thickness. Focusing on the complicated reflection, a Waveform Inversion Matching Method (WIMM) is proposed that enables inversion of the attenuation coefficient from overlapping echoes. Initially, an ultrasonic propagation model in bubble-containing oil films is established based on wave superposition principle. By this, ultrasonic reflections can be simulated theoretically considering both variables including the film thickness and the attenuation coefficient. Afterwards, the measured echoes can be matched with the iteratively optimized simulated echoes with the maximum temporal correlation. Experimental studies on variable-thickness films and bubble-containing oil films demonstrate that with controlled bubble volume fraction below 5%, the achieves relative errors 0.7±2.8)% in thickness measurement and (3.2±2.9)% in attenuation coefficient estimation, validating the method’s effectiveness for ultrasonic parameter inversion in oil film characterization.
科研通智能强力驱动
Strongly Powered by AbleSci AI