颜料
氧化剂
微观结构
材料科学
涂层
图层(电子)
化学工程
复合材料
化学
有机化学
工程类
作者
Shun-Guo Liu,Yueming Li,Zhumei Wang,Zong‐Yang Shen,Zhixiang Xie
标识
DOI:10.1016/j.apsusc.2016.07.046
摘要
Silica layer coated γ-Ce2S3 red pigments were successfully prepared based on a Stober method followed by a hydrogen-argon atmosphere heat treatment at 700 °C. The effect of water/ethanol volume ratio and tetraethoxysilane concentration on the microstructure of the coating layer and its high temperature oxidizing protection to pigments was investigated. A transparent silica coating layer with dense microstructure and about 60 nm thickness can provide a favorable protection for the red hue of the γ-Ce2S3 pigments. The oxidization resistant temperature was enhanced to 550 °C for the dense silica layer coated γ-Ce2S3 pigments as compared to ≤350 °C for the uncoated ones. A red color (L* = 29.59, a* = 27.53 and b* = 27.66) was still remained for such silica coated γ-Ce2S3 pigments after heated treated at 550 °C in air, indicating its potential for high temperature industrial applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI