Mechanical properties of aluminosilicate fiber heat-treated from 800 °C to 1400 °C: Effects of phase transition, grain growth and defects

Abstract Thermal stability of oxide fiber is a key property for high temperature structural applications of typical oxide fiber reinforced oxide matrix composites. This work contributes to provide insight into the mechanical properties of a typical aluminosilicate (AS) fiber heat-treated from 800 °C to 1400 °C in air, with the emphasis on the effects of phase transition, grain growth and defect formations. The results showed a phase reaction occurring at 1150 °C, which formed an orthorhombic structured mullite phase. The grain size of the newly formed mullite was observed increased significantly at higher temperatures. Both the phase transition and grain size led to more flaw formations in the microstructure, which influenced significantly the mechanical property of the AS fiber. Specifically, the Young's modulus and tensile strength were both degraded remarkably from ≈145 GPa to ≈110 GPa, and from ≈1.03 GPa to ≈0.52 GPa, respectively, as the heat-treatment temperature increased from 1200 °C to 1400 °C. Finally, the formations of more flaws yielded a higher dispersion of tensile strength of AS fiber, due to the volume dependent flaw distributions, as revealed by the Weibull statistical analysis.