材料科学
复合材料
热塑性聚氨酯
差示扫描量热法
抗弯强度
极限抗拉强度
弯曲模量
复合数
艾氏冲击强度试验
扫描电子显微镜
弹性体
韧性
热重分析
断裂韧性
造型(装饰)
纤维
玻璃纤维
熔融沉积模型
3D打印
物理
热力学
有机化学
化学
作者
Cevdet Kaynak,Sakine Deniz Varsavas
标识
DOI:10.1177/0892705718772867
摘要
The purpose of this study was to compare the performance of polylactide (PLA)-based materials shaped by the traditional injection molding technique versus three-dimensional (3D)-printing additive manufacturing. Comparisons were performed not only for neat PLA but also for its thermoplastic polyurethane elastomer (TPU) blend and for its E-glass fiber (GF)-reinforced composites. Performance comparison of the injection-molded and 3D-printed specimens was especially conducted to compare their mechanical properties (strength–modulus–toughness) by tensile, flexural, and fracture toughness tests. Other comparisons such as their macro-level appearances, fracture surface morphology, and thermal behavior were also performed by photographic images, scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analysis. It can be concluded that the use of 3D-printing in the shaping of neat PLA and PLA/TPU blend was generally very beneficial; on the other hand, due to the differences in the orientation of the GF reinforcements, there could be certain reductions in the mechanical performance of PLA/GF and PLA/TPU/GF composite specimens.
科研通智能强力驱动
Strongly Powered by AbleSci AI