The novel flexible pressure sensor with skin-like stretchability and sensibility has attracted tremendous attention in academic and industrial fields in recent years.And it also has demonstrated great potential in the applications of electronic skin and wearable devices.It is significant and challenging to develop a highly sensitive flexible pressure sensor with a simple,low energy consuming and low cost method.The silver nanowires(AgNWs) as electrode material were synthesized by polyol process.The polydimethylsiloxane(PDMS)was chosen as a flexible substrate and polyimide(PI)film as dielectric layer.The AgNWs based electrode was prepared in two methods.One is coating the AgNWs on photographic paper followed by in situ PDMS curing.Another one is suction filtration of the AgNWs suspension followed by glass slide transfer and PDMS curing.Then the capacitive pressure sensor was packaged by two electrodes face to face and a sandwiched PI film.The micro-structure of the electrodes based AgNWs was observed by laser scanning confocal microscope and scanning electron microscope.And the effect of electrode micro-structure on the sensitivity of sensor was studied.The results indicate that the tightness of AgNWs coating on electrode surface plays an important role in the sensitivity of sensor.When the AgNWs is well-knit and the surface roughness of electrode is about 0.4μm,the sensitivity is about 0.43kPa-1.Meanwhile when the AgNWs is loosened and the surface roughness is about 0.7μm,the sensitivity increase to 0.65kPa-1.The flexible pressure sensor was prepared with low cost,low energy consuming and high sensitivity,which has great potential in the detection of pulse,heart rate,sound vibration and tiny pressure.