纤维素
反应挤出
傅里叶变换红外光谱
结晶度
琥珀酸酐
琥珀酸
挤压
化学
热稳定性
柠檬酸
核化学
化学改性
材料科学
化学工程
有机化学
聚合物
高分子化学
复合材料
结晶学
工程类
作者
Jéssica Fernanda Pereira,Beatriz Marjorie Marim,Suzana Mali
出处
期刊:Polysaccharides
[Multidisciplinary Digital Publishing Institute]
日期:2022-03-13
卷期号:3 (1): 292-305
被引量:38
标识
DOI:10.3390/polysaccharides3010017
摘要
Cellulose is a natural, unbranched, and fibrous homopolymer that is a major component in several agroindustrial residues. The aim of this study was to extract cellulose from oat hulls and then to modify it using a green route to obtain esterified cellulose through reaction with organic acids employing the reactive extrusion process, which is a process that presents some advantages, including low effluent generation, short reaction times, and it is scalable for large scale use. Citric (CA) and succinic (SA) acids were employed as esterifying agents in different concentrations (0, 5, 12.5, and 20%). Modified cellulose samples were characterized by their degree of substitution (DS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (DRX), scanning electron microscopy (SEM), wettability, oil and water absorption capacities, and thermal stability. DS of modified samples ranged from 2.28 to 3.00, and FTIR results showed that the esterification occurred in all samples for both acids by observation of important bands at 1720 and 1737 cm−1 for samples modified with CA and SA, respectively. All modified samples presented increased hydrophobicity. The modification did not have an influence on the morphological structure or crystallinity pattern of all samples. This study proved to be possible to modify cellulose using a simple and ecofriendly process based on reactive extrusion with organic acids.
科研通智能强力驱动
Strongly Powered by AbleSci AI